Author

C. Eng

26 papers · 1965–2026

1967peak 3 in 20152026

Frequent co-authors

Papers

showing 1–25 of 26 RSS

FPGA-based embedded system implementation of finger vein biometrics

Mohamed Khalil-Hani, P. C. Eng

Signal Processing · October 2010 · cited 26× · DOI ↗ · more like this ·

With the ubiquitous deployment and rapid growth of electronic information systems in today's society, personal or identity verification is now a critical key problem. Due to this fact, biometric authentication has emergently gaining popularity as it provides a high security and reliable approach for personal authentication. However, authentication using ones biometric features has not been widely implemented in a real time embedded system. Thus, in this paper, a novel approach to personal verification using infrared finger vein biometric authentication implemented on FPGA-based embedded system is presented. Creating a biometric authentication system in this resource-constrained embedded system for a real-time application, being a challenging problem in itself, is a significant contribution of this work. The proposed biometric system consists of four modules, namely image acquisition…

Personal verification using finger vein biometrics in FPGA-based System-on-Chip

Mohamed Khalil-Hani, P. C. Eng

Signal Processing · International Conference on Electrical and Electronics Engineering · December 2011 · cited 16× · OpenAlex ↗ · more like this ·

As security and privacy protection have become important today, biometric-based personal verification has also increasingly gain popularity. However, biometric technology applies complex, compute-intensive image processing algorithms which demand to be executed on powerful computers for acceptable processing times. This prevents biometric systems to be used in applications that require low-cost embedded solutions. This paper presents a novel approach to personal verification that utilizes infrared finger vein biometrics implemented in an FPGA-based System-on-Chip platform. To improve performance, we apply the hardware-software co-design approach, using hardware acceleration for the image preprocessing tasks and image buffer management while leaving feature extraction and template matching to software. The system is prototyped on an Altera Nios2 FPGA development board running the…

Lifelines Performance of the Mw 8.8 off Shore Biobío, Chile Earthquake

Alex K. Tang, Peter J. Eng, C. Eng +1 more

Computer Networks and Communications · Procedia Engineering · 2011 · cited 16× · DOI ↗ · more like this ·

The paper will provide a summary of all lifelines performance in this strong earthquake. The paper will discuss the damage, emergency response, and recovery of electric power, telecommunication, transportation (roads and bridges), seaports, airports, water and wastewater, and their facilities. The impact as a result of the lifelines service interruption will be discussed; most important is the discussion of lifelines interdependence. Each lifeline will be separated into its own section that presents the failure modes, emergency response, and recovery of service. Each section will end with observations and recommendations.

FPGA-based embedded hand vein biometric authentication system

P. C. Eng, Mohamed Khalil-Hani

Signal Processing · November 2009 · cited 8× · DOI ↗ · more like this ·

Biometric authentication provides a high security and reliable approach to be used in security access system. However, this authentication method has not been widely implemented in a resource-constrained embedded system. In this project, we investigate a method of personal authentication based on infrared vein pattern in the back of the hand, targeted for embedded system which is implemented in Altera Nios II FPGA prototyping system, running on Real Time Operating System (RTOS). The RTOS applied is Nios2-Linux. A biometric feature is extracted from the vein pattern image and then matched for personal authentication. The algorithm consists of four modules: image capturing, image pre-processing, feature extraction, and the authentication module. These image processing algorithms executed in an embedded system with a 50 MHz fixed point processor. Preliminary experiment on a database of 82…

Integrated security system

Martin Baker, C. Eng

Information Systems · 1989 · cited 3× · DOI ↗ · more like this ·

This paper concerns the integration of Intruder, Fire, Access Control, Energy Management and other disciplines into a single combined system. Discussion centres on the concepts and goals of such a system, rather than on a practical implementation.

ITS AND METEOROLOGY: A CRITICAL PARTNERSHIP

James A. Schiavone, Robert Puentes, C Eng

Artificial Intelligence · August 1997 · cited 1× · OpenAlex ↗ · more like this ·

Intelligent Transportation Systems (ITS) present an excellent opportunity to improve the dissemination of weather information to both the traveling public as well as to decision makers in transportation services. This article will: describe how the transportation and traveling community can benefit from a greater exploitation of weather information; describe the type of weather information that is available to the transportation and traveling community; suggest ideas on how to incorporate weather information into ITS; cite typical examples of initiatives that address the incorporation of weather data into ITS; and encourage a two-way flow of information between the meteorological and transportation communities.

Effect of AI-Generated Immediate Feedback on Student Hybrid Learning, Engagement, and Knowledge Retention

Edward Stephen Onyema, PhD, C.Eng, MIEEE, FIPMD, PhD Ejimofor Ihekeremma A. U., Okonkwo Oxford Collins, Msc, C.Eng

Education · Iconic Research and Engineering Journals · 28 Jul 2026 · cited 0× · DOI ↗ · more like this ·

Artificial Intelligence (AI) integration in education has redefined how feedback is utilized. This quasi-experimental study (N = 180) examined the effect of AI-generated immediate feedback on hybrid learning, engagement, and knowledge retention across six Nigerian tertiary institutions. Data were gathered over 14 weeks using a validated Student Engagement Questionnaire ( ), Computer-Based Tests, and longitudinal LMS analytics. Findings show the AI-assisted group significantly outperformed the traditional group across all metrics (p < 0.001), achieving higher academic performance (78.6% vs. 62.4%), engagement (4.18 vs. 3.24), retention (4.35 vs. 3.02), and conceptual mastery (81.3% vs. 58.2%). A very large effect size for mastery (d = 2.28) proves that adaptive AI prompts drive deep content comprehension and eliminate grading delays. The study contributes to knowledge by extending…

JENet: a JPEG Compliant Image Steganographic Scheme

Yi-Han C Eng, Po-Chyi Su

Computer Vision and Pattern Recognition · 9 Jul 2024 · cited 0× · DOI ↗ · more like this ·

Image steganography is the practice of concealing a confidential message within a cover image to produce a stego image, effectively masking the transmission of information from human detection. The practice can involve embedding another image as the secret message, which can be extracted by the intended recipient from the stego image. However, existing methods often struggle to resist distortions such as JPEG lossy compression. To address this challenge, this study presents JENet (JPEG Embedding Network), a steganography solution that accounts for Discrete Cousin Transform and JPEG quantization. JENet creates stego images in the JPEG format, minimizing the impact of lossy compression. The invertible neural network shares parameters during both embedding and extraction processes, and helps to ensure that the quality of both stego and secret images. The experimental results demonstrate…

A Wireless Based StormPAV Green Pavement Moisture Monitoring System

J. Annisa, L. C. Eng, Nur Tahirah Razali +2 more

Computer Networks and Communications · Unimas Institutional Repository (Universiti Malaysia Sarawak) · October 2019 · cited 0× · DOI ↗ · more like this ·

Concrete provides the foundation for the key systems in most construction projects mainly roads and buildings. For concrete, water is a key ingredient in the hydration process that sets and cures the cement portion of any concrete blend. However, if the excess water or moisture content is not given time to leave the slab, it will cause damage. This research focused on developing a moisture sensor monitoring system for StormP A V green pavement concrete which uses wireless data transfer to the processor. The monitoring system used Arduino as its operating system, dielectric constant concept to monitor the moisture content of the concrete, XBEE Pro as a tool for wireless data transfer, and Node RED software for data collection, monitoring, and analysis. Control experiment was carried out to determine the suitable method for measuring the moisture of the concrete. From the control…

Transformed Spiked Covariance Completion for Time Series Estimation

Benjamin C. Eng, Zhizhen Zhao, Farzad Kamalabadi +1 more

Signal Processing · April 2018 · cited 0× · DOI ↗ · more like this ·

In this paper, we address the problem of estimating a noisy, incomplete time series of a dynamical system with an unknown state evolution. The technique that we will present is transformed spiked covariance completion (TSCC), a matrix completion method for signal estimation. This method exploits the spiked covariance model of the underlying signal to develop a linear estimator that is resilient to noise. We discuss the conditions in the signal model for which this technique is applicable and compare this method against other state-of-the-art time series estimation techniques with a numerical example. Our algorithm gives estimates that are more robust to noise in comparison to the current state-of-the-art techniques that address this same estimation problem.

APPLIED MECHANICS GROUP A STUDY OF NOZZLES IN PRESSURE VESSELS UNDER PRESSURE FATIGUE LOADING

J. Spence, B. Sc, M. Eng +7 more

Sociology and Political Science · 26 Sep 2016 · cited 0× · OpenAlex ↗ · more like this ·

Nozzles in cylindrical vessels have been of special interest to designers for some time and have offered a field of activity for many research workers. This paper presents some static and fatigue tests on five designs of full size pressure vessel nozzles manufactured in two materials. Supporting and other published work is reviewed showing that on the basis of the same maximum stress mild steel vessels give the same fatigue life as low alloy vessels. When compared on the basis of current codes it is shown that mild steel vessels may have five to ten times the fatigue life of low alloy vessels unless special precautions are taken.

STEAM PLANT GROUP REFUSE AS A FUEL First Paper MUNICIPAL REFUSE AS A FUEL

R. H. Watson, B. Sc, C. Eng +3 more

Computer Vision and Pattern Recognition · 11 Sep 2016 · cited 0× · OpenAlex ↗ · more like this ·

Quantitative and qualitative information on domestic refuse as a fuel is given; attention is drawn to its hetero-geneous nature and variability in properties both short term and long term. Modern equipment for incineration is referred to and particular reference is made to the associated aspects of flue gas attemperation and chimney emissions. Potential usage of the heat produced by incineration in boiler or other heat exchanging plant is discussed in terms of functional considerations and economics; in Appendix 1 a more detailed study of the economics of generation of electricity is made. It is concluded that there is no prima facie case for heat recuperation of all incinerators and in the present circumstances each case must be examined on its merits.

cal committee ISO/TC205, Building Environment Design, Working Group 3, Building Control Systems Design. About the Author BACnet Today

Bacnet Down Under, Edvin Krsevan, C. Eng

Artificial Intelligence · 24 Aug 2015 · cited 0× · OpenAlex ↗ · more like this ·

In this article I attempt to provide a broad impression of the Aus-tralian building automation scene, particularly within a BACnet perspective. Some of the more prevalent building automation and control system (BACS) and BACnet problem areas are highlighted and discussed. The working environment of the BACS industry is considered within the context of the various imperatives and drivers that impact on the stakeholders. Bidding Environment The way bids are made, accepted and implemented impact how a BACS is delivered, and what is implemented. The contractual arrangement with which a BACS vendor is bound dictates the degree of separation from the owner or end user. This is set in the course of the bidding process and precedes implemen-

EMC testing Part 1 – Radiated emissions

Eur Ing, Keith Armstrong, C. Eng Miee Mieee +2 more

Statistics and Probability · 22 Aug 2015 · cited 0× · OpenAlex ↗ · more like this ·

This is the first in a series of seven bi-monthly articles on ‘do-it-yourself ’ electromagnetic compatibility (EMC) testing techniques. This series will cover the whole range of test methods – from simple tests for development and fault-finding purposes, through lowest-cost EMC checks; ‘pre-compliance ’ testing with various degrees of accuracy, on-site testing for large systems and installations; to full-specification compliance testing capable of meeting the requirements of national test accreditation bodies. Of course, what is low-cost to an organisation of 5000 people could be thought fairly expensive by a company of 50, and might be too expensive for a one-person outfit, but we will cover the complete range of possible costs here so that no-one is left out. Remember though, that the more you want to save money on EMC testing, or reduce the likelihood of being found selling…

CHANGING ECONOMICS OF GAS TRANSPORTATION

Stephen Gower, C. Eng

Anthropology · 25 Jan 2015 · cited 0× · OpenAlex ↗ · more like this ·

Increasing use of energy, concerns about climate change, plentiful gas reserves and continued technological innovation will ensure that natural gas will play an increasingly significant part in the development of the world’s energy requirements for the foreseeable future. Figure 1 shows that although

Writing Requirements for Flexible Systems1

Joseph Kasser D. Sc, C. Eng, Systems Engineering +1 more

Sociology and Political Science · 4 Dec 2014 · cited 0× · OpenAlex ↗ · more like this ·

Summary. This paper examines some attributes that make software and hardware systems flexible enough to be used for several purposes. Based on these attributes, the paper then develops some issues that need to be addressed in writing requirements for flexible systems. The paper concludes with lessons learned from the success, failure, and poor performance by systems that were designed to be flexible. THE CONTEXT OF A SYSTEM Systems have traditionally been considered as closed systems. Once the need had been established within a specific context, the context was rarely reconsidered during the remainder of the acquisition cycle. With the advent of the term systems of systems (SOS) this closed system approach is transitioning into an open systems approach. Any system in any phase of its life cycle interfaces with other systems in both the spacial and temporal domains. In the spacial domain…

291 A MIXED-CODE APPROACH TO COMMERCIAL MICROCOMPUTER APPLICATIONS

B. R. Gaines, Ph. D, C. Eng

Computer Networks and Communications · 29 Jan 2014 · cited 0× · OpenAlex ↗ · more like this ·

It has become very attractive to develop office automation systems based on microcomputers. However, currently no single one of the commonly available languages on such machines is suited to the full range of requirements: interactive dialogue; accounting; statistics; word-processing; data-base management: etc. This paper outlines the key requirements, tabulates the strengths and weaknesses of current languages, and describes a system that is now in use in a number of commercial applications which allows different parts of an application to be written in the most suitable language, yet the whole to be simply and uniformly integrated together. 1.

An Experimental Investigation of the Mechanical Properties of Bamboo and Cane

Cyril Okhio Ph. D, C. Eng Jeroen Waning, B. Sc. Yemeserach +2 more

Computer Vision and Pattern Recognition · 14 Dec 2013 · cited 0× · OpenAlex ↗ · more like this ·

Abstract – Bamboo and cane remain very valuable natural resources to mankind and are still used today for a multitude of engineering projects. Today the world seeks new and innovative methods for saving resources, and the abundant bamboo and cane have great merit for many possible uses. They include but are not limited to: scaffolding, wood flooring, fencing, bicycles, building construction, furniture fabrication etc. Renewable, natural resources, such as bamboo and cane, will rapidly become sources for inexpensive building materials in an increasingly eco-conscious world. The potential for bamboo and cane is extensive and requires proper testing to substantiate their utilization in other applications. The lack of standards and understanding of the mechanical properties of bamboo and cane has led to the following investigation. Many of the reported mechanical properties of bamboo and…

Summary

R. H. Evans, B. Sc. (hons, A. J. Bower +2 more

Linguistics and Language · 12 Apr 2012 · cited 0× · OpenAlex ↗ · more like this ·

In some areas of London, listeners to BBC Radio National FM services had suffered from poor reception for some time. The problem was particularly severe immediately south of the River Thames where around one million people suffered with unsatisfactory reception on portable and car receivers. This was due to path blocking of the direct signal from the BBC’s Wrotham transmitter, located several miles south east of London, and also high levels of multipath propagation. The lack of spare frequencies in Band II meant that the problem could not be solved by using a conventional filler transmitter in the locality. A novel solution was for a synchronised, low power filler transmitter to be set up at the BBC’s Crystal Palace site, using a frequency offset of only 304 kHz away from the main Wrotham transmission. For this technique to be successful, the two transmitters need to transmit the same…

Abstract ATMOSPHERIC PRESSURE, ENTRAINED FLOW, COAL GASIFICATION RE-VISITED

Pr Eng, C Eng, Pr Eng +3 more

Artificial Intelligence · 25 Jul 2010 · cited 0× · OpenAlex ↗ · more like this ·

In order to keep abreast of the trend in modern ammonia technology towards lower energy consumption, Kynoch Fertilizer Limited and Babcock &amp; Wilcox have developed a new atmospheric pressure coal gasifier. The new gasifier called the Advanced Coal Gasification Process (ACGP) is intended to replace an ageing set of Koppers Totzek units at Kynoch’s plant at Modderfontein, South Africa. Atmospheric pressure operation was chosen in this instance as the change to commercial pressurised gasification had been found to be uneconomic. This paper compares the energy balance of a gas production island incorporating the ACGP with that of a typical dry feed entrained flow pressurised gasification process. The shaft power required by the ACGP was found to be 17 % greater than that for a pressurised gasifier for similar gas delivery conditions. However, the waste heat recovered by the ACGP…

Patient Confidentiality --- At Risk from NHS Wide Networking

Dr Ross, J. Anderson, C. Math +1 more

Information Systems · 22 Nov 2007 · cited 0× · OpenAlex ↗ · more like this ·

Introduction The NHS is building a network to link up Britain&apos;s medical computer systems. The original motive was to transmit administrative data, but the system is now being promoted as a channel for clinical information as well. The claim is that this will enhance the quality of care afforded to patients, by improving communications in a number of ways: ffl messages such as referrals and path lab reports will get to the addressee within minutes rather than days and will be less likely to get lost; ffl videophones will enable remote consultation with specialists and thus save both patients&apos; and consultants&apos; travelling time; ffl central collation of medical records will help clinical auditors and medical researchers evaluate the effectiveness of different treatments. The available descriptions of the network are still somewhat confused 1 , but we shall focus…

The background and aims of profuse

John Bassford C. Eng

Sociology and Political Science · 2007 · cited 0× · DOI ↗ · more like this ·

The aim of this paper is to show the contribution that Profuse has made to the promotion and communication of the use of fuse and fused technology in Europe and the rest of the world, the origins and background of the organisation and how it aims to assist both the educational and user worlds in their appreciation of the vital need to use this seemingly simple but technically complex product.

Scottish Otolaryngological Society: abstracts from the Summer Meeting, June 2005, Dunblane, Scotland, UK

Richard Adamson, George A. Thiel, Dietmar Schenk +9 more

Political Science and International Relations · The Journal of Laryngology & Otology · 6 Apr 2006 · cited 0× · DOI ↗ · more like this ·

Once core knowledge and understanding of the procedure had been electronically demonstrated, we planned to introduce a practical skills course in a simulated theatre environment. This would allow practical application of the necessary tonsillectomy skills.

Bench-marking pool water treatment for coping with Cryptosporidium

R Gregory, C. Eng Micheme Mciwem, Wrc Plc Swindon

Computer Vision and Pattern Recognition · 2002 · cited 0× · OpenAlex ↗ · more like this ·

The frequency of confirmed incidences of cryptosporidiosis associated with pool waters has increased. C.parvum oocysts are removed by filtration and inactivated by the chemical treatments used but only to various levels of success. Pool operators need an easy method for assessing the ability of their treatments to deal with oocysts. The efficacy of a pool water treatment plant depends on its original design and on its existing condition and operation. Oocyst removal by filtration depends much on the size, depth and condition of the filter media, the filtration rate and effective use of coagulation. Either ozone or chlorine dioxide treatment can produce useful inactivation especially at normal pool water temperatures. Chlorination used without other disinfectants has negligible effect in oocyst inactivation even with the long contact times. However, allied to treatment with ozone or…

K Thermal number = Specific heat.

Dr R. G. Fenton, Professor P. L. B. Oxley, C. Eng +3 more

Artificial Intelligence · 1968 · cited 0× · OpenAlex ↗ · more like this ·

An analysis of orthogonal machining is given in which the mean angle of friction usually used to describe the frictional condition at the tool-chip interface is replaced by the average shear stress along this interface. If this shear stress is expressed as a function of strain rate and temperature, using a velocity-modified tem-perature, there is good agreement between theory and experiment. NOTATION Frictional force at tool-chip interface. Force in direction of cutting. Force normal to AB. Force parallel to AB. Force normal to direction of cutting. Chip-tool contact length. Mechanical equivalent of heat. Thermal conductivity. Shear flow stress. Shear flow stress on planes AB, CD, EF. Length of shear zone. Normal force at tool-chip interface. Strain-hardening exponent. Hydrostatic stress.