arXiv.itsnick.co

an independent field guide to 23 million papers from arXiv & OpenAlex — not affiliated with arXiv.org

Author

Zihao Yu

65 papers · 2010–2026

2010: 12011: 12012: 02013: 02014: 02015: 32016: 22017: 02018: 12019: 22020: 32021: 42022: 82023: 72024: 112025: 172026: 5
2010peak 17 in 20252026

Frequent co-authors

Papers

showing 1–25 of 65 RSS

Towards Developing High Performance RISC-V Processors Using Agile Methodology

Yinan Xu, Zihao Yu, Dan Tang +9 more

Hardware and Architecture · · cited 94× · DOI ↗ · more like this ·

While research has shown that the agile chip design methodology is promising to sustain the scaling of computing performance in a more efficient way, it is still of limited usage in actual applications due to two major obstacles: 1) Lack of tool-chain and developing framework supporting agile chip design, especially for large-scale modern processors. 2) The conventional verification methods are less agile and become a major bottleneck of the entire process. To tackle both issues, we propose MINJIE, an open-source platform supporting agile processor development flow. MINJIE integrates a broad set of tools for logic design, functional verification, performance modelling, pre-silicon validation and debugging for better development efficiency of state-of-the-art processor designs. We demonstrate the usage and effectiveness of MINJIE by building two generations of an open-source superscalar…

LEGO-Fi: Transmitter-Transparent CTC with Cross-Demapping

Xiuzhen Guo, Yuan He, Xiaolong Zheng +2 more

Computer Networks and Communications · · cited 42× · DOI ↗ · more like this ·

Cross-Technology Communication (CTC) is an emerging technique that enables direct communication across different wireless technologies. The state-of-the-art works in this area propose physical-level CTC, in which the transmitters emulate signals that follow the receiver's standard. Physical-level CTC means considerable processing complexity at the transmitter, which doesn't apply to the communication from a low-end transmitter to a high-end receiver, e.g. from ZigBee to WiFi. This paper presents transmitter-transparent cross-technology communication, which leaves the processing complexity solely at the receiver side and therefore makes a critical advance toward bidirectional high-throughput CTC. We implement our proposal as LEGO-Fi, the communication from ZigBee to WiFi. The key technique inside is cross-demapping, which stems from two key technical insights: (1) A ZigBee packet leaves…

Supporting Differentiated Services in Computers via Programmable Architecture for Resourcing-on-Demand (PARD)

Jiuyue Ma, Xiufeng Sui, Ninghui Sun +9 more

Computer Networks and Communications · · cited 33× · DOI ↗ · more like this ·

This paper presents PARD, a programmable architecture for resourcing-on-demand that provides a new programming interface to convey an application's high-level information like quality-of-service requirements to the hardware. PARD enables new functionalities like fully hardware-supported virtualization and differentiated services in computers. PARD is inspired by the observation that a computer is inherently a network in which hardware components communicate via packets (e.g., over the NoC or PCIe). We apply principles of software-defined networking to this intra-computer network and address three major challenges. First, to deal with the semantic gap between high-level applications and underlying hardware packets, PARD attaches a high-level semantic tag (e.g., a virtual machine or thread ID) to each memory-access, I/O, or interrupt packet. Second, to make hardware components more…

Crocs: Cross-Technology Clock Synchronization for WiFi and ZigBee

Zihao Yu, Chengkun Jiang, Yuan He +2 more

cs.NI · · cited 31× · arXiv ↗ · more like this ·

Clock synchronization is a key function in embedded wireless systems and networks. This issue is equally important and more challenging in IoT systems nowadays, which often include heterogeneous wireless devices that follow different wireless standards. Conventional solutions to this problem employ gateway-based indirect synchronization, which suffers low accuracy. This paper for the first time studies the problem of cross-technology clock synchronization. Our proposal called Crocs synchronizes WiFi and ZigBee devices by direct cross-technology communication. Crocs decouples the synchronization signal from the transmission of a timestamp. By incorporating a barker-code based beacon for time alignment and cross-technology transmission of timestamps, Crocs achieves robust and accurate synchronization among WiFi and ZigBee devices, with the synchronization error lower than 1 millisecond.…

Accelerating Text-to-Image Editing via Cache-Enabled Sparse Diffusion Inference

Zihao Yu, Haoyang Li, Fangcheng Fu +2 more

cs.CV · · cited 20× · arXiv ↗ · more like this ·

Due to the recent success of diffusion models, text-to-image generation is becoming increasingly popular and achieves a wide range of applications. Among them, text-to-image editing, or continuous text-to-image generation, attracts lots of attention and can potentially improve the quality of generated images. It's common to see that users may want to slightly edit the generated image by making minor modifications to their input textual descriptions for several rounds of diffusion inference. However, such an image editing process suffers from the low inference efficiency of many existing diffusion models even using GPU accelerators. To solve this problem, we introduce Fast Image Semantically Edit (FISEdit), a cached-enabled sparse diffusion model inference engine for efficient text-to-image editing. The key intuition behind our approach is to utilize the semantic mapping between the…

Resolution adjustable Lissajous scanning with piezoelectric MEMS mirrors

Yuyao Zhang, Yichen Liu, Lihao Wang +6 more

Computer Vision and Pattern Recognition · Optics Express · · cited 19× · DOI ↗ · more like this ·

We previously designed a dual-axis piezoelectric MEMS mirror with a low crosstalk gimbal structure, which is utilized as the key device for further research for laser beam scanning. This paper mainly focuses on studying the Lissajous scanning resolution of this MEMS mirror with frequency ratio and phase modulation. For accurately evaluating the scanning resolution, the center angular resolution of Lissajous scanning is redefined by theoretical calculation and verified with experimental measurement. Meanwhile, the scanning nonlinearity of MEMS mirror is studied carefully. Finally, the MEMS mirror works at the state of pseudo-resonance, and the center angular resolution better than 0.16° (H) × 0.03° (V) is achieved at a scanning Field of view (FoV) of 35.0° (H) × 16.5° (V). Moreover, a feasible route of resolution adjustable Lissajous scanning is provided by optimization of frequency…

AIGC-VQA: A Holistic Perception Metric for AIGC Video Quality Assessment

Yiting Lu, Xin Li, Bingchen Li +6 more

Computer Vision and Pattern Recognition · · cited 17× · DOI ↗ · more like this ·

With the development of generative models, such as the diffusion model, and auto-regressive model, AI-generated content (AIGC) is experiencing an explosive growth. Moreover, existing quality metrics extracted from fixed pre-trained models struggle to align accurately with human perception. There is an urgent need for an adaptive metric capable of gauging the multiple critical factors (i.e., technical quality, aesthetic quality, and video-text alignment) related to quality within AIGC videos, to provide quality assessment and guide optimization of generative models. In this work, we propose a holistic metric for AIGC video quality assessment, termed AIGC-VQA, which contains three functional branches for the cooperation on technical, aesthetic, and video-text alignment aspects in AIGC videos. Specifically, to efficiently transfer the knowledge of image-text alignment to the video-text…

Scientometric analyses of digital inequity in education: problems and solutions

Yongye Meng, Wei Xu, Ziqing Liu +1 more

Information Systems · Humanities and Social Sciences Communications · · cited 16× · DOI ↗ · more like this ·

There are several gaps in the field of digital inequity in education because it is still in its initial stage. To fill the research gaps, this study has revealed a complex landscape of problems and solutions. The analysis highlights the urgent need to address digital inequity that prevents equal access to educational resources and opportunities. While the challenges are numerous, the solutions are also diverse. Addressing cultural norms and stereotypes that perpetuate gender-based inequity is crucial, along with investing in gender-sensitive technology and infrastructure. Promoting digital literacy among all learners is also essential to empower them in the digital age. By taking a comprehensive approach that combines policy changes, technological advancements, and educational strategies, we can hope to bridge the digital inequity and create a more equitable and inclusive education…

BiCord: Bidirectional Coordination among Coexisting Wireless Devices

Zihao Yu, Pengyu Li, Carlo Alberto Boano +4 more

Computer Networks and Communications · · cited 15× · DOI ↗ · more like this ·

Cross-technology interference is a major threat to the dependability of low-power wireless communications. Due to power and bandwidth asymmetries, technologies such as Wi-Fi tend to dominate the RF channel and unintentionally destroy low-power wireless communications from resource-constrained technologies such as ZigBee, leading to severe coexistence issues. To address these issues, existing schemes make ZigBee nodes individually assess the RF channel's availability or let Wi-Fi appliances blindly reserve the medium for the transmissions of low-power devices. Without a two-way interaction between devices making use of different wireless technologies, these approaches have limited scenarios or achieve inefficient network performance. This paper presents BiCord, a bidirectional coordination scheme in which resource-constrained wireless devices such as ZigBee nodes and powerful Wi-Fi…

QoSMT

Xin Jin, Yaoyang Zhou, Bowen Huang +7 more

Hardware and Architecture · · cited 9× · DOI ↗ · more like this ·

Simultaneous multithreading (SMT) technology improves CPU throughput, but also causes unpredictable performance fluctuations for co-located workloads. Although recent major SMT processors have adopted some techniques to promote hardware support for quality-of-service (QoS), achieving both precise performance control and high throughput on SMT architectures is still a challenging open problem.

Video Quality Assessment Based on Swin TransformerV2 and Coarse to Fine Strategy

Zihao Yu, Fengbin Guan, Yiting Lu +2 more

cs.CV · · cited 8× · arXiv ↗ · more like this ·

The objective of non-reference video quality assessment is to evaluate the quality of distorted video without access to reference high-definition references. In this study, we introduce an enhanced spatial perception module, pre-trained on multiple image quality assessment datasets, and a lightweight temporal fusion module to address the no-reference visual quality assessment (NR-VQA) task. This model implements Swin Transformer V2 as a local-level spatial feature extractor and fuses these multi-stage representations through a series of transformer layers. Furthermore, a temporal transformer is utilized for spatiotemporal feature fusion across the video. To accommodate compressed videos of varying bitrates, we incorporate a coarse-to-fine contrastive strategy to enrich the model's capability to discriminate features from videos of different bitrates. This is an expanded version of the…

SmarTiSCH: An Interference-Aware Engine for IEEE 802.15.4e-based Networks

Zihao Yu, Xin Na, Carlo Alberto Boano +4 more

Computer Networks and Communications · · cited 8× · DOI ↗ · more like this ·

Time-Slotted Channel Hopping (TSCH) is a popular link-layer pro-tocol defined in the IEEE 802.15.4e standard that improves the reli-ability and throughput of wireless sensor networks by exploiting diversity in both time and frequency. Despite the body of literature proposing several scheduling schemes for TSCH, a gap yet to be filled is the design of an effective way to deal with internal and external interference, which are both known to strongly affect communication performance. In fact, existing works either make use of a fixed schedule (and hence cannot cope with interference), or re-quire extra control traffic (and hence increase energy consumption). In this paper, we present SmarTiSCH, an interference-aware en-gine for IEEE 802.15.4e-based networks that retains the simplicity and energy-efficiency of autonomous scheduling, while increasing the awareness as well as robustness to…

NTIRE 2025 Challenge on Short-form UGC Video Quality Assessment and Enhancement: Methods and Results

Xin Li, Kun Yuan, Bingchen Li +110 more

eess.IV · · cited 7× · arXiv ↗ · more like this ·

This paper presents a review for the NTIRE 2025 Challenge on Short-form UGC Video Quality Assessment and Enhancement. The challenge comprises two tracks: (i) Efficient Video Quality Assessment (KVQ), and (ii) Diffusion-based Image Super-Resolution (KwaiSR). Track 1 aims to advance the development of lightweight and efficient video quality assessment (VQA) models, with an emphasis on eliminating reliance on model ensembles, redundant weights, and other computationally expensive components in the previous IQA/VQA competitions. Track 2 introduces a new short-form UGC dataset tailored for single image super-resolution, i.e., the KwaiSR dataset. It consists of 1,800 synthetically generated S-UGC image pairs and 1,900 real-world S-UGC images, which are split into training, validation, and test sets using a ratio of 8:1:1. The primary objective of the challenge is to drive research that…

CAMAL: Optimizing LSM-trees via Active Learning

Weiping Yu, Siqiang Luo, Zihao Yu +1 more

cs.DB · · cited 7× · arXiv ↗ · more like this ·

We use machine learning to optimize LSM-tree structure, aiming to reduce the cost of processing various read/write operations. We introduce a new approach Camal, which boasts the following features: (1) ML-Aided: Camal is the first attempt to apply active learning to tune LSM-tree based key-value stores. The learning process is coupled with traditional cost models to improve the training process; (2) Decoupled Active Learning: backed by rigorous analysis, Camal adopts active learning paradigm based on a decoupled tuning of each parameter, which further accelerates the learning process; (3) Easy Extrapolation: Camal adopts an effective mechanism to incrementally update the model with the growth of the data size; (4) Dynamic Mode: Camal is able to tune LSM-tree online under dynamically changing workloads; (5) Significant System Improvement: By integrating Camal into a full system RocksDB…

GENTI: GPU-Powered Walk-Based Subgraph Extraction for Scalable Representation Learning on Dynamic Graphs

Zihao Yu, Ningyi Liao, Siqiang Luo

Artificial Intelligence · Proceedings of the VLDB Endowment · · cited 7× · DOI ↗ · more like this ·

Graph representation learning is an emerging task for effectively embedding graph-structured data with learned features. Among them, Subgraph-based GRL (SGRL) methods have demonstrated better scalability and expressiveness for large-scale tasks. The core challenge of applying SGRL to dynamic graphs lies in accommodating the extraction of subgraphs to evolving data with efficient computation. To address the efficiency bottleneck, we propose GENTI, a GPU-oriented SGRL algorithm for dynamic graphs. Our approach mainly improves the critical subgraph extraction stage by disentangling it into two phases, namely neighbor sampling and subgraph gathering, which are respectively performed on CPU and GPU in an asynchronous fashion. The design favorably eliminates the dependence of feature learning on subgraph extraction, and is capable of exploiting the GPU's batch processing ability to remarkably…

A Multifrequency Heterodyne Phase Error Compensation Method for 3D Reconstruction

Zihao Yu, Jin Liu, Haima Yang +2 more

Computer Vision and Pattern Recognition · Journal of Sensors · · cited 6× · DOI ↗ · more like this ·

In view of the problem of “jumping points” in the phase unwrapping of the multifrequency heterodyne principle, this paper proposes a novel method to improve the multifrequency heterodyne. By solving the root-mean-square error of the original frequency function, it includes the relationship between the error and the adjacent phase in the condition of constrained phase unwrapping, and it compensates phase <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mo>±</mml:mo><mml:mn>2</mml:mn><mml:mi>π</mml:mi></mml:math> of the skip point. To ensure the accuracy of phase unwrapping, the function with a “jump point” after each phase unwrapping and the absolute phase curve of the principal value function are used to establish the threshold judgment model of the least square method, and the initial phase unwrapping of the principal value function with different frequencies is…

Garlic Cast: Lightweight and Decentralized Anonymous Content Sharing

Qian Chen, Junjie Shi, Zihao Yu +2 more

Artificial Intelligence · · cited 6× · DOI ↗ · more like this ·

Anonymous content sharing over the Internet protects user privacy and content confidentiality. Most overlay anonymous communication protocols employ some relay nodes as the proxies to forward content and require relays to perform cryptography or coding operations on messages. They have two major limitations. First, extra computation overhead may discourage overlay nodes from serving as relays. Second, long forwarding latency at relays makes an anonymous path easier to fail under network churn. In this paper, we present a lightweight and decentralized anonymous content sharing system named Garlic Cast, which requires near-zero computation cost on relays and does not rely on any centralized service. Garlic Cast uses random walks to find proxies in overlay networks and an security-enhanced Information Dispersal Algorithm to search and deliver content files. We have implemented a prototype…

XiangShan: An Open Source Project for High-Performance RISC-V Processors Meeting Industrial-Grade Standards

Kaifan Wang, Jian Chen, Yinan Xu +5 more

Hardware and Architecture · IEEE Micro · · cited 5× · DOI ↗ · more like this ·

It is widely believed that an open-source hardware ecosystem can reduce development costs and lower barriers to innovation. However, developing an open-source industrial-grade high-performance processor is a challenging undertaking. For mass adoption, such an IP needs to have an advanced microarchitecture that supports out-of-order execution for high performance, a robust verification infrastructure for reliable quality, and high configurability to enable diverse use cases. With best-in-class performance, XiangShan is an open-source project for RISC-V processors that fully meets these requirements. To maximize overall efficiency, XiangShan adopted a collaborative hardware development model, teaming up with industry partners on processor design, implementation, and verification. Through innovations in agile development processes and tools, the design of the processors can be evolved…

Taming the Errors in Cross-Technology Communication: A Probabilistic Approach

Xiuzhen Guo, Yuan He, Jia Zhang +3 more

Computer Networks and Communications · ACM Transactions on Sensor Networks · · cited 4× · DOI ↗ · more like this ·

Cross-Technology Communication (CTC) emerges as a technology to enable direct communication across different wireless technologies. The state of the art on CTC employs physical-level emulation. Due to the protocol incompatibility and the hardware restriction, there are intrinsic emulation errors between the emulated signals and the legitimate signals. Unresolved emulation errors hurt the reliability of CTC and the achievable throughput, but how to improve the reliability of CTC remains a challenging problem. Taking the CTC from WiFi to BLE as an example, this work first presents a comprehensive understanding of the emulation errors. We then propose WEB, a practical CTC approach that can be implemented with commercial devices. The core design of WEB is split encoding: based on the probabilistic distribution of emulation errors, the WiFi sender manipulates its payload to maximize the…

Design and optimization of DBSCAN Algorithm based on CUDA

Bingchen Wang, Chenglong Zhang, Lei Song +3 more

cs.DC · · cited 4× · arXiv ↗ · more like this ·

DBSCAN is a very classic algorithm for data clus- tering, which is widely used in many fields. However, with the data scale growing much more bigger than before, the traditional serial algorithm can not meet the performance requirement. Recently, parallel computing based on CUDA has developed very fast and has great advantage on big data. This paper summarizes the algorithms proposed before and improves the performance of the old DBSCAN algorithm by using CUDA and parallel computing. The algorithm uses shared memory as much as possible compared with other algorithms and it has very good scalability. A data set is tested on the new version of DBSCAN. Finally, we analyze the results and give a conclusion that our algorithm is approximately 97 times faster than the serial version.

The multiplayer

Zihao Yu, Nicholas Diakopoulos, Mor Naaman

Computer Vision and Pattern Recognition · · cited 4× · DOI ↗ · more like this ·

We present a multi-perspective video "multiplayer" designed to organize social video aggregated from online sites like YouTube. Our system automatically time-aligns videos using audio fingerprinting, thus bringing them into a unified temporal frame. The interface utilizes social metadata to visually aid navigation and cue users to more interesting portions of an event. We provide details about the visual and interaction design rationale of the multiplayer.

InternVQA: Advancing Compressed Video Quality Assessment with Distilling Large Foundation Model

Fengbin Guan, Zihao Yu, Yiting Lu +2 more

eess.IV · · cited 3× · arXiv ↗ · more like this ·

Video quality assessment tasks rely heavily on the rich features required for video understanding, such as semantic information, texture, and temporal motion. The existing video foundational model, InternVideo2, has demonstrated strong potential in video understanding tasks due to its large parameter size and large-scale multimodal data pertaining. Building on this, we explored the transferability of InternVideo2 to video quality assessment under compression scenarios. To design a lightweight model suitable for this task, we proposed a distillation method to equip the smaller model with rich compression quality priors. Additionally, we examined the performance of different backbones during the distillation process. The results showed that, compared to other methods, our lightweight model distilled from InternVideo2 achieved excellent performance in compression video quality assessment.

Structured Light 3D Reconstruction System Based on a Stereo Calibration Plate

Meiying Li, Jin Liu, Haima Yang +2 more

Computer Vision and Pattern Recognition · Symmetry · · cited 3× · DOI ↗ · more like this ·

Calibration is a critical step in structured light 3D imaging systems. However, in the traditional calibration process, since the calibration plate is based on a two-dimensional model, the flatness of the calibration plate and the angle of the photo will affect the subsequent stitching steps based on the feature points. The number of photos also affects the calibration results. To improve the calibration accuracy, multiple photos need to be taken. The primary objective of this study was to achieve the simple and fast calibration of system parameters, so a method obtaining a large number of calibration data by homography matrix is presented, and a corresponding stereo target is designed in symmetry. First, using the relationship between the corner coordinates of the left and right parts of the stereo calibration plate and the coordinates of the world coordinate system, the homography…

Discerning Art Works through Active Machine Learning

Zihao Yu

Computer Vision and Pattern Recognition · 2022 3rd International Conference on Computer Vision, Image and Deep Learning &amp; International Conference on Computer Engineering and Applications (CVIDL &amp; ICCEA) · · cited 2× · DOI ↗ · more like this ·

Scene classification is a popular and important question in computer vision and has been developed in different areas. Applying computer vision to artworks has become a popular topic in recent years. However, the traditional random sampling to identify the artworks through machine learning requires a large data set and, therefore, a higher cost to get a solid result. This paper compares random sampling and active learning (uncertainty sampling) performance using a data set (8446 paintings) of the 50 most influential painters in Europe from the 13th to the 20th century. and then propose that the active learning strategy can build a stronger model that requires smaller data sets. The active learning model can be further improved through training in larger data sets and applied in the artwork recognition for artificial intelligence..

A<i>Labeled</i>Architecture for Low-Entropy Clouds: Theory, Practice, and Lessons

Chuanqi Zhang, Sa Wang, Zihao Yu +6 more

Information Systems · Intelligent Computing · · cited 2× · DOI ↗ · more like this ·

Resource efficiency and quality of service (QoS) are both long-pursuit goals for cloud providers over the last decade. However, hardly any cloud platform can exactly achieve them perfectly even until today. Improving resource efficiency or resource utilization often could cause complicated resource contention between colocated cloud applications on different resources, spanning from the underlying hardware to the software stack, leading to unexpected performance degradation. The low-entropy cloud proposes a new software-hardware codesigned technology stack to holistically curb performance interference from the bottom up and obtain both high resource efficiency and high quality of application performance. In this paper, we introduce a new computer architecture for the low-entropy cloud stack, called labeled von Neumann architecture (LvNA), which incorporates a set of label-powered…