arXiv.itsnick.co

an independent field guide to 23 million papers from arXiv & OpenAlex — not affiliated with arXiv.org

Author

Zhangb

136 papers · 1997–2026

1997: 11998: 11999: 02000: 02001: 02002: 12003: 02004: 22005: 22006: 02007: 02008: 02009: 52010: 12011: 02012: 22013: 12014: 82015: 42016: 1012017: 02018: 12019: 02020: 02021: 02022: 12023: 12024: 12025: 22026: 1
1997peak 101 in 20162026

Frequent co-authors

Papers

showing 1–25 of 136 RSS

On the Quasi-Ordering of Catacondensed Hexagonal Systems with Respective to their Clar Covering Polynomials

Liqiong Xu, Fuji Zhangb

Discrete Mathematics and Combinatorics · Zeitschrift für Naturforschung A · · cited 3× · DOI ↗ · more like this ·

In this paper, we discuss the quasi-ordering of hexagonal systems with respective to the coefficients of their Clar covering polynomials (also known as Zhang-Zhang polynomials). The last six minimal catacondensed hexagonal systems and the hexagonal chains with the maximum Clar covering polynomial are determined. Furthermore, the smallest pair of incomparable catacondensed hexagonal systems is given.

FRAVaR: A Fast Failure Recovery Framework for Inter-DC Network

Haoqiang Huang, Yuchao ZhangB, Ran Wang +4 more

Computer Networks and Communications · · cited 2× · DOI ↗ · more like this ·

Along with the development of 5G and IoT technologies in recent years, Inter Data Center (Inter-DC) network is facing an explosive growth of geographically distributed user data, which needs to be duplicated among DCs in a real-time manner. Transmission-based applications require high availability that is going beyond 99.99%. However, with the expansion of Inter-DC network scale, link failures are also growing, which seriously affects data transmission efficiency, so fast link failure recovery is then urgently needed. Many previous works have been done to achieve fast failure recovery, but most of them ignore two key points, 1) the cost of deploying recovery strategies, and 2) the side-effect of re-transmission to network availability. These two factors make the existing failure recovery process too slow to be practical in real-time online industrial environments. To achieve realistic…

Keep Good Men Company:A Study on Transnational Social Capital Transfer of Expatriates Based on Social Network Analysis Model

Yang Zhangb

Sociology and Political Science · Chinese Journal of Sociology · · cited 2× · OpenAlex ↗ · more like this ·

Returning expatriates not only brought back to their native countries intellectual capital but also social capital.The transfer of academic social capital by expatriates give domestic scholars better access to foreign information,foster participation in the global academic community,and build confidence and academic reputation.But current research concerning the phenomenon of social capital transfer of expatriates is very limited.This study proposes a cross-border social capital transfer model of expatraites by applying the theory of homophily,peer effects and group homogenization.An analysis of the data on transnational academic capital transfers,collected from the Network of Thousands of Academic Collaborators,a recruitment network of returning expatraites,shows that returnees are able to accumulate significantly more academic social capital in their post-return career.Foreign…

Coarse iris classification using box-counting to estimate fractal dimensions

LiYua, David Mba, Zhangb +2 more

Signal Processing · · cited 2× · OpenAlex ↗ · more like this ·

This paper proposes a novel algorithm for the automatic coarse classification of iris images using a box-counting method to estimate the fractal dimensions of the iris. First, the iris image is segmented into sixteen blocks, eight belonging to an upper group and eight to a lower group. We then calculate the fractal dimension value of these image blocks and take the mean value of the fractal dimension as the upper and the lower group fractal dimensions. Finally, all the iris images are classified into four categories in accordance with the upper and the lower group fractal dimensions. This classification method has been tested and evaluated on 872 iris cases, and the proportions of these categories in our database are 5.50%, 38.54%, 21.79%, and 34.17%. The iris images are classified with two algorithms, the double threshold algorithm, which classifies iris images with an accuracy of…

Palmprint classi cation using principal lines

XiangqianWua, David Mba, Zhangb +2 more

Signal Processing · · cited 1× · OpenAlex ↗ · more like this ·

This paper proposes a novel algorithm for the automatic classi cation of low-resolution palmprints. First the principal lines of the palm are de ned using their position and thickness. Then a set of directional line detectors is devised. After that we use these directional line detectors to extract the principal lines in terms of their characteristics and their de nitions in two steps: the potential beginnings (“line initials”) of the principal lines are extracted and then, based on these line initials, a recursive process is applied to extract the principal lines in their entirety. Finally palmprints are classi ed into six categories according to the number of the principal lines and the number of their intersections. The proportions of these six categories (1–6) in our database containing 13,800 samples are 0.36%, 1.23%, 2.83%, 11.81%, 78.12% and 5.65%, respectively. The proposed…

DBCF: Dual-Branch Complementary Fusion of Foundation Models for Generalized Deepfake Detection

Fengming Gu, Mingjie He, Zonghui Guo +2 more

cs.CV · · cited 0× · arXiv ↗ · more like this ·

As image generation and editing technologies have progressed substantially, facial forgeries pose significant challenges to privacy and public safety. Due to limited ability to capture forgery cues, existing small-scale forgery detection models often struggle to generalize across various domains and unseen manipulations. To address this limitation, researchers have turned to large-scale foundation models, which can provide richer representations and better generalization. Nevertheless, relying on a single foundation model alone remains insufficient for effective forgery detection. While models like CLIP offer robust global semantic cues, they lack the capacity to capture detailed local facial features. In contrast, DINO excels at capturing local structural features of faces, but provides weaker global semantic context. To fully utilize the synergies among multiple foundation models, we…

The complete chloroplast genome sequence of <i>Pittosporum illicioides</i> Makino, 1900 (Pittosporaceae)

Guo, Song, Liang, Xianglan, Li, Chunlian +2 more

Artificial Intelligence · Figshare · · cited 0× · DOI ↗ · more like this ·

<i>Pittosporum illicioides</i> Makino, 1900, a member of the genus <i>Pittosporum</i>, is a traditional medicinal plant extensively used in the Yao ethnic regions of southern China. The complete chloroplast genome of <i>P. illicioides</i> was sequenced and assembled for the first time, with a length of 153,610 bp, comprising a large single-copy (LSC) region (84,915 bp), a small single-copy (SSC) region (18,727 bp), and a pair of inverted repeat (IRa and IRb) regions (24,984 bp each) separated by the LSC and SSC regions. A total of 128 genes were annotated, including 83 protein-coding genes, 37 transfer RNA (tRNA) genes, and 8 ribosomal RNA (rRNA) genes. Among these, ten genes contained a single intron, while two genes (<i>clpP</i> and <i>ycf3</i>) possessed two introns. Phylogenetic analysis revealed that <i>P. illicioides</i> is most closely related to <i>Pittosporum tobira</i>. This…

Research on obstacle avoidance of indoor robot based on predictive control algorithm

Zhen Xue, Yongjun Tiana, Zhipeng Zhangb +1 more

Computer Vision and Pattern Recognition · · cited 0× · DOI ↗ · more like this ·

This paper studies a predictive control algorithm to solve the obstacle avoidance problem of robot indoors. Firstly, the Kalman filter algorithm [1–3] is used to predict the position of the obstacle, and the coordinates of the obstacle in the robot camera are obtained by the vision algorithm, which is used as the initial state vector of the Kalman filter [4]. Then, assuming that the obstacle obeys the uniform velocity model, the predicted position of the obstacle is output through the updated prediction of the Kalman filter. Secondly, the adaptive fuzzy PID algorithm [5] is used to accurately control the movement speed [6–8] of the robot when it obtains the coordinates of the obstacles, so that it can pass faster without touching the obstacles. Finally, the feasibility of the algorithm is verified by simulation experiments, and the goal of robot Safe Obstacle Avoidance in the indoor…

Plasma nitriding of 20CrMo steel with nanostructured surface layer

Jian Suna, Jing Zhangb, Weiping Tongc +2 more

Cultural Studies · · cited 0× · OpenAlex ↗ · more like this ·

Abstract. A nanostructured surface layer was produced on an 20CrMo steel plate by means of ultrasonic shot peening (USSP) treatment. Plasma nitriding of the treated and un-treated sample were investigated by using structure analysis (X-ray diffraction, optical microscopy, and transmission electron microscopy) as well as hardness measurements. It was found that a nanostructured surface layer sample developed a compound layer twice as thick as that in a coarse-grained sample under the same plasma nitriding conditions (530 o C for 6 h). In addition, the USSP nitrided sample exhibited higher hardness and thicker hardened surface layer in comparison with coarse-grained nitrided sample.

Therapeutic Effect on Bladder Cancer with a Conditionally Replicating Oncolytic Virus Derived from Type II Herpes Simplex Virus

Kwan Joong Jooa, Hongtao Lib, Xiaoliu Zhangb +1 more

Demography · · cited 0× · OpenAlex ↗ · more like this ·

Abstract. Purpose: Despite recent improvements, resistance to traditional immunotherapy or chemotherapy is still common in patients with bladder cancer. We constructed an oncolytic virus from herpes simplex virus type II (HSV-2), which selectively targets tumor cells with an activated Ras signaling pathway. We evaluated the antitumor effect of this oncolytic HSV-2 (FusOn-H2) against bladder cancer, and compared with that of a first generation oncolytic virus derived from HSV-1 (Baco-1). Materials and methods: We established bladder tumor at the orthotopic site in C3H/He mice using the MBT-2 cells. Baco-1 or FusOn-H2 was instilled into the bladder through the urethra respectively. Tumor volume and weight were recorded by the end of the experiment. Animal spleens were also collected to determine if any anti-tumor immunity was elicited during virotherapy in this syngeneic bladder cancer…

Strengthening and Toughening Mechanisms of the Microalloying Non-Quenching and Tempering Steel

Yunhua Huanga, Yue Zhangb, Hao Zhai +2 more

Sociology and Political Science · · cited 0× · OpenAlex ↗ · more like this ·

Abstract. The microstructure of a microalloying non-quenching and tempering steel developed recently was analyzed through OM, SEM and TEM, in order to find the strengthening and toughening mechanisms of the steel. All of the dislocations and subgrain boundaries in the grains, the martensite in the martensite-austenite islands of the grainy bainite structure, the dispersed phases in the grains and at the grain boundaries, and the grain size were observed and studied in our experiments. The results indicate that the strengthening results from phase transition, dislocation, subgrain structure, dispersion phase and fined grain, and the toughness relates with the ferrite matrix consisting of the grainy bainite and the grain size of the steel. The mechanisms between the hot-rolled-and-cooled and the tempered steel are slightly different.

Research on virtual private LAN service signaling protocol and its application

Wei Donga, Zhenya Zhangb

Computer Networks and Communications · · cited 0× · OpenAlex ↗ · more like this ·

Abstract. Virtual Private LAN Service (VPLS), as a new layer-2 Virtual Private Network (VPN) technology has attracted enormous interest in the filed during the last few years. Unlike traditional layer 2 VPN, which provides only point-to-point connectivity, VPLS is built for multi-point connectivity and has a broadcast capability like a common LAN.A series of RFCs and drafts related to VPLS have been proposed by IETF. To enable VPLS in a real network, signaling setup is the first step. In this paper, we first conduct some research on LDP-based signaling protocol and demonstrate how to set up control-plane communication in VPLS network. Then, based on the research, we implement the signaling protocol in an embedded router system. In combination with existing data plane software, VPLS is deployed in a real network and some experiments are conducted to test the validity of signaling…

The Research on Information Sharing in Supply Chain and Its Information Sharing Entities

Zhiyong Tiana, Tao Zhangb, Bingwu Liua

Communication · · cited 0× · OpenAlex ↗ · more like this ·

Abstract. Based on Barnard’s classical organization theories this article presented new interpretion on the essence of supply chain and the position and role of information sharing in the supply chain, and then based on MSU’s fundamental mode of supply-chain management to construct information-shared systemic frame of supply chain and indicated the positions and roles of different entities in information sharing on the mentioned research frame. This article also made research on information-shared entities in some aspects as the relation between information-shared entities and information-sharing, information sharing among entities, the information-shared motivation among entities and multi-entities information sharing and tried to enrich theoretical research of supply-chain information sharing.

Preliminary Research on Behavior of CFST Columns after Exposure to

Overall Stage Of Fire, Jingxuan Wanga, Pengpeng Zhangb +1 more

Transportation · · cited 0× · OpenAlex ↗ · more like this ·

overall stage of fire, mechanical behavior Abstract. A finite element analysis (FEA) model was proposed to predict the behavior of concrete-filled steel tubular (CFST) columns at overall stage of fire combined load based on ABAQUS. The whole stage includes initial loading, heating, cooling and post-fire phases. Accurate thermal and material model, element type, and solution method were chosen reasonably in the model considering the temperature and combined load. Due to lacking of test data about multi-phase of fires, the FEA model was verified with tests at different stages respectively. Some experimental specimens under different thermal and mechanical conditions were modeled using the FEA model, and the results obtained have good agreement with the experimental results. The mechanism of the CFST columns after exposure to overall stage of fire was also investigated based on the model.

Compound Fault Feature Separation of Rolling Bearing Based on Complex Wavelet and Energy Operator Demodulation

Yang Yanga, Jian Yu, Zhangb Sui +1 more

Law · · cited 0× · OpenAlex ↗ · more like this ·

transform Abstract. Compound fault feature separation is a difficult problem in diagnosis field of mechanical system. For the rolling bearing with compound fault on outer and inner race, feature separation technology based on complex wavelet transform and energy operator demodulation is introduced. Through continuous wavelet transform, coefficients of mixed fault signal can be achieved in different wavelet transform domain (i.e. real, imaginary, modulus and phase domain). Furthermore, wavelet power spectrum contours and time average wavelet energy spectrum are applied to extract the scales which hold rich fault information, and the wavelet coefficient slice of specific scale is also drawn. For wavelet coefficients in different domain, spectrum analysis and energy operator demodulation can be used successfully to separate mixed fault. The comparison of feature extraction effect between…

Influence of Chitosan on Electrospun PVA Nanofiber Mat

Ziang Yie, Jeannie Tana, Xiwen Zhangb

Computational Theory and Mathematics · · cited 0× · OpenAlex ↗ · more like this ·

Abstract. Many efforts had been reported to modify the structure of electropun nanofibers in order to obtain superior functional properties of poly(vinyl-alcohol) (PVA). This paper discusses the influence of chitosan on the morphology of electropun PVA nanofibers and their related properties. Spider–net and fiber–bridging structured PVA nanofibers are successfully fabricated by blending with chitosan. Chitosan as natural cationic polysaccharide increases the excess charge of the host polymer PVA. Nanofibers are diverged into thinner nanofibers and a continuous web formed when electrical voltage applied. The presence of additional OH groups from chitosan and larger surface area of the net structure for hydrogen bonding enhance the hydrophilicity and mechanical properties of the nanofiber mat as compare to pure PVA which are evaluated through water contact angle and tensile testing…

Study on Practice Teaching of Engineering Colleges or Universities

Yan Sheng Yaoa, Ke Ren Zhangb, Da Hua Lic +1 more

Information Systems · · cited 0× · OpenAlex ↗ · more like this ·

Abstract: Engineering practice education is important for engineering college students, but it needs the support of infrastructure and human input. With the number of students expanding dramatically in many local colleges or universities since the 21cn, resources of practice teaching can not meet the requirements of personnel training. With the development of the society and technologies, old practical teaching model also can not adapt to the demand of human resource market. This article presents the status of the current practice teaching and sums up many problems of local colleges and universities. In addition some reform ideas and exploration are presented in Anhui University of Architecture (AUA).

The Strength Analysis of Tower Vacuum Dryer Structural

Zhijun Zhanga, Shiwei Zhangb, Bin Zhangc +1 more

Sociology and Political Science · · cited 0× · OpenAlex ↗ · more like this ·

Abstract. Tower vacuum dryer room is the key device for continuous vacuum dryer. In order to lower the cost of manufacture, the wall of dryer should be thinner. But as the pressure container, it must have the well intensity while operating. Because its complex structure, the simple calculation is not enough, the finite element analysis in intensity control was carried out. The model of vacuum dryer was built, the intensity of general primary membrane stress and the intensity of primary bending stress was picked-up on the max stress intensity point through the path of wall thickness. Accord with JB4732-1995, the structural strength was fulfilled the requirement.

Viscosity of amorphous materials during glass-forming: more from the

Adam-gibbs Law, H. H. Ruana, L. C. Zhangb

Artificial Intelligence · · cited 0× · OpenAlex ↗ · more like this ·

Abstract. This study aims to investigate the microscopic origin of viscosity by simplifying an amorphous system to a mixture of many independent atomic subsystems. The response of the macroscopic system is then taken as an ensemble average of the relaxations of such subsystems. The result shows that with the reduction of temperature, the overall viscosity changes from the harmonic mean of the subsystems, which is dominated by the fast relaxations, to the arithmetic mean governed by the slowest relaxation. The successful application of our model to the amorphous Selenium indicates the model captures the fundamental mechanism of the viscosity variation. 1.

Study on the Error of the Three-dimensional Structure Light Measurement Based on Triangulation Principle

Yanmei Tanga, Xuechang Zhangb, Tao Liangc

Computer Vision and Pattern Recognition · · cited 0× · OpenAlex ↗ · more like this ·

Abstract. The error of the three-dimensional structure light measurement is analyzed in the paper. The experiment is done to verify the presence of measurement error. The error of data is analyzed and some conclusions are gotten. The three-dimensional structure light measurement is based on the triangulation principle. The error distribution is different because of the view angle of measurement equipment relative to the part to be inspected, the effect of the external environment light and the effect of the data processing software system. Finally, the corresponding compensation measures are put forward in the paper according to different errors.

D376 Journal of The Electrochemical Society, 162 (8) D376-D381 (2015) 0013-4651/2015/162(8)/D376/6/$33.00 © The Electrochemical Society Formation Mechanism and Microstructures of Sn Films on Mo/Cu Substrates by Electrodeposition

P. Ren, Z N. Dai, Z H. Y. Deng +1 more

Sociology and Political Science · · cited 0× · OpenAlex ↗ · more like this ·

Tin (Sn) films have been prepared on a molybdenum substrate covered with copper (Mo/Cu) by the electrodeposition method from the electrolyte solutions of tin sulfate (SnSO4) and trisodium citrate (C6H5Na3O7). The formation mechanism and microstructures of the films were investigated by cyclic voltammetry (CV), chronoamperometry (CA), scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). The CV and CA measurements show the electrodeposition is controlled by the diffusion process of tin ions. By means of Scharifker-Hills model and microstructural analysis, the Sn nucleation mechanism is clarified to be an instantaneous nucleation mechanism. The influence of deposition time, solution concentration and the potential on microstructures of Sn films has been systematically investigated and the optimal growth parameters for preparing dense Sn films are obtained.

The calculation of ship wave in shallow water by finite difference method

Hui Deng A, Zhihong Zhangb, Jiannong Guc

Artificial Intelligence · · cited 0× · OpenAlex ↗ · more like this ·

Abstract. Based on the shallow water wave potential flow theory and slender ship assumption, the mathematical model is established for calculating wave caused by ship moving at supercritical speed. The wave pattern caused by ship moving at supercritical speed in shallow water was calculated by using the finite difference method. The effects of channel wall were analyzed. The computed results were compared with the ones calculated by Fourier integral transform method and experiment. A good agreement exists between the calculated with experimental results. The mathematical model and the calculation method were validated.

A Key Parameters Analysis Method of the Quality Control in the Semiconductor Multiple Manufacturing Processes Based on Functional Data Analysis Method

Yang Liua, Zhisheng Zhangb, Jinfei Shic

Artificial Intelligence · · cited 0× · OpenAlex ↗ · more like this ·

Abstract. The quality of the semiconductor products is defined by a series of the key performance parameters which have some certain relations to the electronic test parameters generated among the multiple manufacturing processes. Aimed at the quality control problem of the multiple manufacturing processes, a FDA (functional data analysis) method has been used and got the mapping relationship between the process parameters of the product lines and the product quality characteristic. A simple Change-Point hypothesis has been tested to analyze the data curves generated by the FDA method, and the key process variables have been found. Then, the equalization between the new test result and the old one has been verified by the Kolmogorov-Smirnov 2-sample test method. Some multiple manufacturing processes test data, which was collected from a semiconductor product workshop, has been modeled…