arXiv.itsnick.co

an independent field guide to 23 million papers from arXiv & OpenAlex — not affiliated with arXiv.org

Author

Scott Splinter

13 papers · 2010–2020

2010: 12011: 52012: 22013: 02014: 02015: 02016: 22017: 12018: 12019: 02020: 1
2010peak 5 in 20112020

Frequent co-authors

Papers

showing 1–13 of 13 RSS

The Hythirm Project: Flight Thermography of the Space Shuttle During Hypersonic Re-Entry

Thomas Horvath, Deborah Tomek, Scott Splinter +6 more

Applied Mathematics · 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition · · cited 64× · DOI ↗ · more like this ·

This report describes a NASA Langley led endeavor sponsored by the NASA Engineering Safety Center, the Space Shuttle Program Office and the NASA Aeronautics Research Mission Directorate to demonstrate a quantitative thermal imaging capability. A background and an overview of several multidisciplinary efforts that culminated in the acquisition of high resolution calibrated infrared imagery of the Space Shuttle during hypervelocity atmospheric entry is presented. The successful collection of thermal data has demonstrated the feasibility of obtaining remote high-resolution infrared imagery during hypersonic flight for the accurate measurement of surface temperature. To maximize science and engineering return, the acquisition of quantitative thermal imagery and capability demonstration was targeted towards three recent Shuttle flights - two of which involved flight experiments flown on…

Comparative Measurements of Earth and Martian Entry Environments in the NASA Langley HYMETS Facility

Scott Splinter, Kim S. Bey, Jeffrey Gragg +1 more

Applied Mathematics · 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition · · cited 43× · DOI ↗ · more like this ·

Arc-jet facilities play a major role in the development of heat shield materials for entry vehicles because they are capable of producing representative high-enthalpy flow environments. Arc-jet test data is used to certify material performance for a particular mission and to validate or calibrate models of material response during atmospheric entry. Materials used on missions entering Earth s atmosphere are certified in an arc-jet using a simulated air entry environment. Materials used on missions entering the Martian atmosphere should be certified in an arc-jet using a simulated Martian atmosphere entry environment, which requires the use of carbon dioxide. Carbon dioxide has not been used as a test gas in a United States arc-jet facility since the early 1970 s during the certification of materials for the Viking Missions. Materials certified for the Viking missions have been used on…

Nitric Oxide PLIF Measurements in the Hypersonic Materials Environmental Test System (HYMETS)

Jennifer Inman, Brett F. Bathel, Craig T. Johansen +4 more

Applied Mathematics · 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition · · cited 19× · DOI ↗ · more like this ·

A nonintrusive laser-based measurement system has been applied for the first time in the HYMETS (Hypersonic Materials Environmental Test System) 400 kW arc-heated wind tunnel at NASA Langley Research Center. Planar laser-induced fluorescence of naturally occurring nitric oxide (NO) has been used to obtain instantaneous flow visualization images, and to make both radial and axial velocity measurements. Results are presented at selected facility run conditions, including some in simulated Earth atmosphere (75% nitrogen, 20% oxygen, 5% argon) and others in simulated Martian atmosphere (71% carbon dioxide, 24% nitrogen, 5% argon), for bulk enthalpies ranging from 6.5 MJ/kg to 18.4 MJ/kg. Flow visualization images reveal the presence of large scale unsteady flow structures, and indicate nitric oxide fluorescence signal over more than 70% of the core flow for bulk enthalpies below about 11…

Computational Predictions of the Hypersonic Material Environmental Test System Arcjet Facility

Andrew J. Brune, Walter E. Bruce, David E. Glass +1 more

Applied Mathematics · Journal of Thermophysics and Heat Transfer · · cited 18× · DOI ↗ · more like this ·

The Hypersonic Materials Environmental Test System arc-jet facility located at the NASA Langley Research Center in Hampton, Virginia, is primarily used for the research, development, and evaluation of high-temperature thermal protection systems for hypersonic vehicles and reentry systems. In order to improve testing capabilities and knowledge of the test article environment, a detailed three-dimensional model of the arc-jet nozzle and free-jet portion of the flow field has been developed. The computational fluid dynamics model takes into account non-uniform inflow state profiles at the nozzle inlet as well as catalytic recombination efficiency effects at the probe surface. Results of the numerical simulations are compared to calibrated Pitot pressure and stagnation-point heat flux for three test conditions at low, medium, and high enthalpy. Comparing the results and test data indicates…

Quantitative Spectral Radiance Measurements in the HYMETS Arc Jet

Paul M. Danehy, Drew Hires, Craig T. Johansen +4 more

Applied Mathematics · 50th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition · · cited 18× · DOI ↗ · more like this ·

Calibrated spectral radiance measurements of gaseous emission spectra have been obtained from the HYMETS (Hypersonic Materials Environmental Test System) 400 kW arc-heated wind tunnel at NASA Langley Research Center. A fiber-optic coupled spectrometer collected natural luminosity from the flow. Spectral radiance measurements are reported between 340 and 1000 nm. Both Silicon Carbide (SiC) and Phenolic Impregnated Carbon Ablator (PICA) samples were placed in the flow. Test gases studied included a mostly-N2 atmosphere (95% nitrogen, 5% argon), a simulated Earth Air atmosphere (75% nitrogen, 20% oxygen, 5% argon) and a simulated Martian atmosphere (71% carbon dioxide, 24% nitrogen, 5% argon). The bulk enthalpy of the flow was varied as was the location of the measurement. For the intermediate flow enthalpy tested (20 MJ/kg), emission from the Mars simulant gas was about 10 times higher…

Characterization of Candidate Materials for Remote Recession Measurements of Ablative Heat Shield Materials

Bradley D. Butler, Michael Winter, Francesco Panerai +5 more

Applied Mathematics · 54th AIAA Aerospace Sciences Meeting · · cited 16× · DOI ↗ · more like this ·

A method of remotely measuring surface recession of a material sample in a plasma flow through emission spectroscopy of the post shock layer was characterized through experiments in the NASA Langley HYMETS arcjet facility. Different methods for delivering the seed products into the Phenolic Impregnated Carbon Ablator (PICA) materials samples were investigated. Three samples were produced by seeding the PICA material with combinations of Al, Si, HfO2, VB2, Al2O3, SiO2, TiC, HfC, NaCl, and MgCl2 through infusing seed materials into a core of PICA, or through encapsulating seed material in an epoxy disk, mechanically bonding the disk to a PICA sample. The PICA samples seeded with the candidate tracers were then tested at surface temperatures near 2400 K under a low pressure air plasma. The emission of Al, Ti, V, Na, and Mg in the post-shock layer was observed in the UV with a high…

Global Thermography of the Space Shuttle During Hypersonic Re-entry

Jeff Taylor, Thomas S. Spisz, D. M. Gibson +7 more

Applied Mathematics · 42nd AIAA Thermophysics Conference · · cited 9× · DOI ↗ · more like this ·

Three dimensional surface thermography of the windward side of the Space Shuttle based on near infrared measurements is presented for STS-119, STS-125, STS-128, STS-132 and STS-133 reentries. A method used to project 2-D imagery to 3-D surface geometry is used to improve on previously used iterative method both in accuracy and in computational speed. Effects of material dependent surface spectral emissivities, image blurring and image-model alignment are all seen to have strong effects on the resultant temperature map. Results indicate best surface temperature accuracies in regions of small thermal gradients. Acronyms

Thermal Protection System Aerothermal Screening Tests in the HYMETS Facility

Christine Szalai, Robin A. Beck, Matthew Gasch +5 more

Applied Mathematics · 42nd AIAA Thermophysics Conference · · cited 7× · DOI ↗ · more like this ·

The Entry, Descent, and Landing (EDL) Technology Development Project has been tasked to develop Thermal Protection System (TPS) materials for insertion into future Mars Entry Systems. A screening arc jet test of seven rigid ablative TPS material candidates was performed in the Hypersonic Materials Environmental Test System (HYMETS) facility at NASA Langley Research Center, in both an air and carbon dioxide test environment. Recession, mass loss, surface temperature, and backface thermal response were measured for each test specimen. All material candidates survived the Mars aerocapture relevant heating condition, and some materials showed a clear increase in recession rate in the carbon dioxide test environment. These test results supported subsequent down-selection of the most promising material candidates for further development.

Remote Infrared Imaging of the Space Shuttle During Hypersonic Flight: HYTHIRM Mission Operations and Coordination

R. J. Schwartz, Harry A. Verstynen, Jennifer Gruber +7 more

Applied Mathematics · 42nd AIAA Thermophysics Conference · · cited 6× · DOI ↗ · more like this ·

The Hypersonic Thermodynamic Infrared Measurements (HYTHIRM) project has been responsible for obtaining spatially resolved, scientifically calibrated in-flight thermal imagery of the Space Shuttle Orbiter during reentry. Starting with STS-119 in March of 2009 and continuing through to the majority of final flights of the Space Shuttle, the HYTHIRM team has to date deployed during seven Shuttle missions with a mix of airborne and ground based imaging platforms. Each deployment of the HYTHIRM team has resulted in obtaining imagery suitable for processing and comparison with computational models and wind tunnel data at Mach numbers ranging from over 18 to under Mach 5. This paper will discuss the detailed mission planning and coordination with the NASA Johnson Space Center Mission Control Center that the HYTHIRM team undergoes to prepare for and execute each mission.

Nitric Oxide Laser-Induced Fluorescence Rotational Thermometry in a Hypersonic Non-Equilibrium Flow

Connor C. McDougall, Craig T. Johansen, Roland Herrmann-Stanzel +3 more

Applied Mathematics · AIAA Scitech 2020 Forum · · cited 3× · DOI ↗ · more like this ·

Spatially-resolved nitric oxide (NO) planar laser-induced fluorescence (PLIF) rotational thermometry was performed on a Mach 5 non-equilibrium flow around a blunt-body specimen in the Hypersonic Materials Environmental Test System (HyMETS) arc-heat wind tunnel at the NASA Langley Research Center. Transitions within the (0,0) band in the A2Sigma+ - X2Pi system of NO were excited with a 10 Hz pulsed ultra-violet laser. A multi-line fitting algorithm was applied to the PLIF spectra and transitions were filtered based on an iterative method that maximizes thermometry accuracy. NO PLIF thermometry results are compared to non-equilibrium computational fluid dynamics (CFD) simulations reported in the literature. Differences between the experiment and CFD are quantified for the free-stream, post-shock, shear-layer, and expansion-fan regions of the flow. Potential sources of error, applicable to…

Computational Simulations of the NASA Langley HyMETS Arc-Jet Facility

Andrew J. Brune, W. E. Bruce, David E. Glass +1 more

Applied Mathematics · NASA Technical Reports Server (NASA) · · cited 2× · OpenAlex ↗ · more like this ·

The Hypersonic Materials Environmental Test System (HyMETS) arc-jet facility located at the NASA Langley Research Center in Hampton, Virginia, is primarily used for the research, development, and evaluation of high-temperature thermal protection systems for hypersonic vehicles and reentry systems. In order to improve testing capabilities and knowledge of the test article environment, an effort is underway to computationally simulate the flow-field using computational fluid dynamics (CFD). A detailed three-dimensional model of the arc-jet nozzle and free-jet portion of the flow-field has been developed and compared to calibration probe Pitot pressure and stagnation-point heat flux for three test conditions at low, medium, and high enthalpy. The CFD model takes into account uniform pressure and non-uniform enthalpy profiles at the nozzle inlet as well as catalytic recombination efficiency…

Active Oxidation of a UHTC-Based CMC

David E. Glass, Scott Splinter

Applied Mathematics · NASA Technical Reports Server (NASA) · · cited 2× · OpenAlex ↗ · more like this ·

The active oxidation of ceramic matrix composites (CMC) is a severe problem that must be avoided for multi-use hypersonic vehicles. Much work has been performed studying the active oxidation of silicon-based CMCs such as C/SiC and SiC-coated carbon/carbon (C/C). Ultra high temperature ceramics (UTHC) have been proposed as a possible material solution for high-temperature applications on hypersonic vehicles. However, little work has been performed studying the active oxidation of UHTCs. The intent of this paper is to present test data indicating an active oxidation process for a UHTC-based CMC similar to the active oxidation observed with Si-based CMCs. A UHTC-based CMC was tested in the HyMETS arc-jet facility (or plasma wind tunnel, PWT) at NASA Langley Research Center, Hampton, VA. The coupon was tested at a nominal surface temperature of 3000 F (1650 C), with a stagnation pressure of…

Characterization of Ablation Product Radiation Signatures of PICA and FiberForm

Michael Winter, Bradley D. Butler, Paul M. Danehy +5 more

Applied Mathematics · NASA STI Repository (National Aeronautics and Space Administration) · · cited 1× · DOI ↗ · more like this ·

Emission spectroscopy measurements in the post-shock layer in front of low density ablative material samples of different shapes were obtained in the NASA Langley HYMETS arcjet facility. A horizontal line of measurement positions was imaged on the entrance slit of the spectrometer allowing detection of the entire stagnation line in front of the samples. The stagnation line measurements were used to compare the post-shock layer emission signatures in front of PICA and FiberForm. The emission signatures of H, NH, and OH are characteristic for pyrolysis gases and consequently were only observed in front of the PICA samples. CN and C were found in front of both materials and are mainly due to interactions of the carbon fibers with the plasma. In all tests with instrumented samples, the emission of Mn, Cr, and Ni was observed when the thermocouple temperatures reached or exceeded ~1,500 K…