Polar codes provably achieve the symmetric capacity of a memoryless channel while having an explicit construction. This work aims to increase the throughput of polar decoder hardware by an order of magnitude relative to the state of the art successive-cancellation decoder. We present an algorithm, architecture, and FPGA implementation of a gigabit-per-second polar decoder.
Polar codes asymptotically achieve the symmetric capacity of memoryless channels, yet their error-correcting performance under successive-cancellation (SC) decoding for short and moderate length codes is worse than that of other modern codes such as low-density parity-check (LDPC) codes. Of the many methods to improve the error-correction performance of polar codes, list decoding yields the best results, especially when the polar code is concatenated with a cyclic redundancy check (CRC). List decoding involves exploring several decoding paths with SC decoding, and therefore tends to be slower than SC decoding itself, by an order of magnitude in practical implementations. In this paper, we present a new algorithm based on unrolling the decoding tree of the code that improves the speed of list decoding by an order of magnitude when implemented in software. Furthermore, we show that for…
In this work, we present hardware and software implementations of flexible polar systematic encoders and decoders. The proposed implementations operate on polar codes of any length less than a maximum and of any rate. We describe the low-complexity, highly parallel, and flexible systematic-encoding algorithm that we use and prove its correctness. Our hardware implementation results show that the overhead of adding code rate and length flexibility is little, and the impact on operation latency minor compared to code-specific versions. Finally, the flexible software encoder and decoder implementations are also shown to be able to maintain high throughput and low latency.
Computer Networks and Communications · Espace ÉTS (ETS) · · cited 55× · OpenAlex ↗ · more like this ·
In this letter we present a new architecture for a polar decoder using a reduced complexity successive cancellation decoding algorithm. This novel fully-unrolled, deeply-pipelined architecture is capable of achieving a coded throughput of over 237 Gbps for a (1024,512) polar code implemented using an FPGA. This decoder is two orders of magnitude faster than state-of-the-art polar decoders.
Polar codes are a recently proposed class of block codes that provably achieve the capacity of various communication channels. They received a lot of attention as they can do so with low-complexity encoding and decoding algorithms, and they have an explicit construction. Their recent inclusion in a 5G communication standard will only spur more research. However, only a couple of ASICs featuring decoders for polar codes were fabricated, and none of them implements a list-based decoding algorithm. In this paper, we present ASIC measurement results for a fabricated 28 nm CMOS chip that implements two different decoders: the first decoder is tailored toward error-correction performance and flexibility. It supports any code rate as well as three different decoding algorithms: successive cancellation (SC), SC flip and SC list (SCL). The flexible decoder can also decode both non-systematic and…
Dynamic and non-linear systems are emerging as potential candidates for random bit generation. In this context, chaotic systems, which are both dynamic and stochastic, are particularly suitable. This paper introduces a new continuous chaotic system along with its corresponding implementation, which targets field-programmable gate array (FPGA). This chaotic system has five dimensions, which exhibit complex chaotic dynamics, thus enabling the utilization of chaotic signals in cryptography. A mathematical analysis is presented to demonstrate the dynamic characteristics of the proposed hyperchaotic system. A novel digital implementation of the proposed system is presented. Moreover, a data scrambling circuit is implemented to eliminate the bias effect and increase the randomness of the bitstream generated from the chaotic signals. We show that the proposed random bit generator has high…
Polar codes are widely considered as one of the most exciting recent discoveries in channel coding. For short to moderate block lengths, their error-correction performance under list decoding can outperform that of other modern error-correcting codes. However, high-speed list-based decoders with moderate complexity are challenging to implement. Successive-cancellation (SC)-flip decoding was shown to be capable of a competitive error-correction performance compared to that of list decoding with a small list size, at a fraction of the complexity, but suffers from a variable execution time and a higher worst-case latency. In this work, we show how to modify the state-of-the-art high-speed SC decoding algorithm to incorporate the SC-flip ideas. The algorithmic improvements are presented as well as average execution-time results tailored to a hardware implementation. The results show that…
Polar codes are a recently proposed family of provably capacity-achieving error-correction codes that received a lot of attention. While their theoretical properties render them interesting, their practicality compared to other types of codes has not been thoroughly studied. Towards this end, in this paper, we perform a comparison of polar decoders against LDPC and Turbo decoders that are used in existing communications standards. More specifically, we compare both the error-correction performance and the hardware efficiency of the corresponding hardware implementations. This comparison enables us to identify applications where polar codes are superior to existing error-correction coding solutions as well as to determine the most promising research direction in terms of the hardware implementation of polar decoders.
In this letter we present a new architecture for a polar decoder using a reduced complexity successive cancellation decoding algorithm. This novel fully-unrolled, deeply-pipelined architecture is capable of achieving a coded throughput of over 237 Gbps for a (1024,512) polar code implemented using an FPGA. This decoder is two orders of magnitude faster than state-of-the-art polar decoders.
In this work, we present a simplified successive cancellation list decoder that uses a Chase-like decoding process to achieve a six time improvement in speed compared to successive cancellation list decoding while maintaining the same error-correction performance advantage over standard successive-cancellation polar decoders. We discuss the algorithm and detail the data structures and methods used to obtain this speed-up. We also propose an adaptive decoding algorithm that significantly improves the throughput while retaining the error-correction performance. Simulation results over the additive white Gaussian noise channel are provided and show that the proposed system is up to 16 times faster than an LDPC decoder of the same frame size, code rate, and similar error-correction performance, making it more suitable for use as a software decoding solution.
In this work, we present a family of architectures for polar decoders using a reduced-complexity successive-cancellation decoding algorithm that employs unrolling to achieve extremely high throughput values while retaining moderate implementation complexity. The resulting fully-unrolled, deeply-pipelined architecture is capable of achieving a coded throughput in excess of 1 Tbps on a 65 nm ASIC at 500 MHz---three orders of magnitude greater than current state-of-the-art polar decoders. However, unrolled decoders are built for a specific, fixed code. Therefore we also present a new method to enable the use of multiple code lengths and rates in a fully-unrolled polar decoder architecture. This method leads to a length- and rate-flexible decoder while retaining the very high speed typical to unrolled decoders. The resulting decoders can decode a master polar code of a given rate and…
Successive-cancellation list (SCL) decoding is an algorithm that provides very good error-correction performance for polar codes. However, its hardware implementation requires a large amount of memory, mainly to store intermediate results. In this paper, a partitioned SCL algorithm is proposed to reduce the large memory requirements of the conventional SCL algorithm. The decoder tree is broken into partitions that are decoded separately. We show that with careful selection of list sizes and number of partitions, the proposed algorithm can outperform conventional SCL while requiring less memory.
Polar codes are an exciting new class of error correcting codes that achieve the symmetric capacity of memoryless channels. Many decoding algorithms were developed and implemented, addressing various application requirements: from error-correction performance rivaling that of LDPC codes to very high throughput or low-complexity decoders. In this work, we review the state of the art in polar decoders implementing the successive-cancellation, belief propagation, and list decoding algorithms, illustrating their advantages.
Computer Networks and Communications · · cited 20× · DOI ↗ · more like this ·
Polar codes are capacity-achieving error-correcting codes with an explicit construction that can be decoded with low-complexity algorithms. In this work, we show how the state-of-the-art low-complexity decoding algorithm can be improved to better accommodate low-rate codes. Dedicated hardware is added to efficiently decode new constituent codes. Also, we use polar code construction alteration to further improve the latency and throughput. A polar decoder for a (1024, 512) code is implemented on two different FPGAs. It has 25% lower latency over the previous work and a coded throughput of 436 Mbps and 638 Mbps on the Xilinx Virtex 6 and Altera Stratix IV FPGAs, respectively.
Computer Networks and Communications · Espace ÉTS (ETS) · · cited 18× · DOI ↗ · more like this ·
Polar decoders are well suited for high-speed software implementations. In this work, we present a framework for generating fully-unrolled software polar decoders with branchless data flow. We discuss the memory layout of data in these decoders and show the optimization techniques used. At 335 Mbps, when decoding a (2048, 1707) polar code, the resulting decoder has more than twice the speed of the state of the art floating-point software polar decoder.
Among error-correcting codes, polar codes are the first to provably achieve channel capacity with an explicit construction. In this work, we present software implementations of a polar decoder that leverage the capabilities of modern general-purpose processors to achieve an information throughput in excess of 200 Mbps, a throughput well suited for software-defined-radio applications. We also show that, for a similar error-correction performance, the throughput of polar decoders both surpasses that of LDPC decoders targeting general-purpose processors and is competitive with that of state-of-the-art software LDPC decoders running on graphic processing units.
Product codes are a concatenated error-correction scheme that has been often considered for applications requiring very low bit-error rates, which demand that the error floor be decreased as much as possible. In this work, we consider product codes constructed from polynomial algebraic codes, and propose a novel low-complexity post-processing technique that is able to improve the error-correction performance by orders of magnitude. We provide lower bounds for the error rate achievable under post processing, and present simulation results indicating that these bounds are tight.
Polar codes are a recent family of error-correcting codes with a number of desirable characteristics. Their disruptive nature is illustrated by their rapid adoption in the $5^{th}$-generation mobile-communication standard, where they are used to protect control messages. In this work, we describe a two-stage system tasked with identifying the location of control messages that consists of a detection and selection stage followed by a decoding one. The first stage spurs the need for polar-code detection algorithms with variable effort to balance complexity between the two stages. We illustrate this idea of variable effort for multiple detection algorithms aimed at the first stage. We propose three novel blind detection methods based on belief-propagation decoding inspired by early-stopping criteria. Then we show how their reliability improves with the number of decoding iterations to…
Polar codes are a new class of block codes with an explicit construction that provably achieve the capacity of various communications channels, even with the low-complexity successive-cancellation (SC) decoding algorithm. Yet, the more complex successive-cancellation list (SCL) decoding algorithm is gathering more attention lately as it significantly improves the error-correction performance of short- to moderate-length polar codes, especially when they are concatenated with a cyclic redundancy check code. However, as SCL decoding explores several decoding paths, existing hardware implementations tend to be significantly slower than SC-based decoders. In this paper, we show how the unrolling technique, which has already been used in the context of SC decoding, can be adapted to SCL decoding yielding a multi-Gbps SCL-based polar decoder with an error-correction performance that is…
Powerful Forward Error Correction (FEC) schemes are used in optical communications to achieve bit-error rates below $10^{-15}$. These FECs follow one of two approaches: concatenation of simpler hard-decision codes or usage of inherently powerful soft-decision codes. The first approach yields lower Net Coding Gains (NCGs), but can usually work at higher code rates and have lower complexity decoders. In this work, we propose a novel FEC scheme based on a product code and a post-processing technique. It can achieve an NCG of 9.52~dB at a BER of $10^{-15}$ and 9.96~dB at a BER of $10^{-18}$, an error-correction performance that sits between that of current hard-decision and soft-decision FECs. A decoder architecture is designed, tested on FPGA and synthesized in 65 nm CMOS technology: its 164 bits/cycle worst-case information throughput can reach 100 Gb/s at the achieved frequency of…
Computer Networks and Communications · PolyPublie (École Polytechnique de Montréal) · · cited 7× · OpenAlex ↗ · more like this ·
The relaxed half-stochastic (RHS) algorithm is a recently proposed binary message-passing decoding algorithm for low-density parity check codes that can reach the same error rate performance as belief propagation algorithms that exchange LLR messages. Because of its low-complexity interleaver, the RHS algorithm makes it possible to achieve a fully-parallel implementation that can converge to a codeword in only a few clock cycles on average, enabling high throughput and power efficiency. To demonstrate the practicality of the RHS algorithm, we implement a decoder for the popular IEEE 802.3an 10GBASE-T standard. The paper presents details of the hardware implementation, as well as post-layout results for an ASIC implementation in 65nm CMOS technology, which indicate that the decoder can operate at 448 MHz and occupies an area of 4.41 mm2. The results obtained from bit-accurate software…
Automorphism Ensemble (AE) decoding has recently drawn attention as a possible alternative to list decoding of polar codes. In this letter, we investigate the distribution of Partially-Symmetric Reed-Muller (PS-RM) codes, a family of polar codes yielding good performances under AE decoding. We prove the existence of these codes for almost all code dimensions for code lengths $N\leq 256$. Moreover, we analyze the absorption group of this family of codes under SC decoding, proving that valuable permutations in AE decoding always exist. Finally, we experimentally show that PS-RM codes can outperform state-of-the-art polar-code-construction algorithms in terms of error-correction performance for short code lengths, while reducing decoding latency.
This work presents another look at an analog network coding scheme for multi-user spread-spectrum communication systems. Our proposed system combines coding and cooperation between a relay and users to boost the throughput and to exploit interference. To this end, each pair of users, $\mathcal{A}$ and $\mathcal{B}$, that communicate with each other via a relay $\mathcal{R}$ shares the same spreading code. The relay has two roles, it synchronizes network transmissions and it broadcasts the combined signals received from users. From user $\mathcal{B}$'s point of view, the signal is decoded, and then, the data transmitted by user $\mathcal{A}$ is recovered by subtracting user $\mathcal{B}$'s own data. We derive the analytical performance of this system for an additive white Gaussian noise channel with the presence of multi-user interference, and we confirm its accuracy by simulation.
In this paper, we propose a low-latency decoding solution of shortened polar codes based on their automorphism groups. The automorphism group of shortened polar codes, designed according to two existing shortening patterns, are shown to be limited but non-empty, making the Automorphism Ensemble (AE) decoding of shortened polar codes possible. Extensive simulation results for shortened polar codes under AE are provided and are compared to the SC-List (SCL) algorithm. The block-error rate of shortened polar codes under AE matches or beats SCL while lowering the decoding latency.
Polar codes are a class of error-correcting codes that provably achieve the capacity of practical channels. The successive-cancellation flip (SCF) decoder is a low-complexity decoder that was proposed to improve the performance of the successive-cancellation (SC) decoder as an alternative to the high-complexity successive-cancellation list (SCL) decoder. The SCF decoder improves the error-correction performance of the SC decoder, but the variable execution time and the high worst-case execution time pose a challenge for the realization of receivers with fixed-time algorithms. The dynamic SCF (DSCF) variation of the SCF decoder further improves the error-correction performance but the challenge of decoding delay remains. In this work, we propose a simplified restart mechanism (SRM) that reduces the execution time of SCF and DSCF decoders through conditional restart of the additional…