arXiv.itsnick.co

an independent field guide to 23 million papers from arXiv & OpenAlex — not affiliated with arXiv.org

Author

Gerald Cook

25 papers · 1965–2016

1965: 11966: 11967: 01968: 11969: 41970: 21971: 11972: 11973: 21974: 11975: 21976: 01977: 01978: 01979: 01980: 01981: 01982: 11983: 01984: 01985: 01986: 01987: 01988: 11989: 01990: 01991: 01992: 01993: 01994: 01995: 01996: 01997: 01998: 01999: 02000: 02001: 02002: 12003: 42004: 12005: 02006: 02007: 02008: 02009: 02010: 02011: 02012: 02013: 02014: 02015: 02016: 1
1965peak 4 in 19692016

Frequent co-authors

Papers

showing 1–25 of 25 RSS

Microsaccades and the Velocity-Amplitude Relationship for Saccadic Eye Movements

B.L. Zuber, Laura Stark, Gerald Cook

Human-Computer Interaction · Science · · cited 356× · DOI ↗ · more like this ·

The maximum velocities of microsaccades (flicks) are an increasing function of amplitude of movement. Measured velocities fall on the extrapolation of the curve of maximum velocity versus amplitude for voluntary saccades and involuntary corrective saccades. Hence all these movements are produced by a common physiological system, or the characteristics of the movements are determined by a single dynamically limiting element.

The Human Eye-Movement Mechanism

Gerald Cook

Human-Computer Interaction · Archives of Ophthalmology · · cited 114× · DOI ↗ · more like this ·

A model for the human eye-positioning mechanism is presented. The derivation of the model is outlined briefly. Experiments for obtaining actual eye-movement behavior are described. Model simulations and comparisons of these results with experimental results are presented. The comparisons support the validity of the model. The physical basis of the model adds meaning to the model and insight into the operation of the actual system.

Horizontal Eye Movements Studied With the On-Line Computer

Gerald Cook, Laura Stark, B.L. Zuber

Human-Computer Interaction · Archives of Ophthalmology · · cited 33× · DOI ↗ · more like this ·

An on-line computer has been used to study the dynamic behavior of horizontal eye movements. The computer was used to present to the subject quasi-random target movements in a horizontal plane and to record and store his responses for processing. Averaging techniques were used extensively and increased the repeatability of the data markedly.

ResQuad: Toward a semi-autonomous wilderness search and rescue unmanned aerial system

M. Talha Agcayazi, Eric Cawi, Arsenie Jurgenson +2 more

Computer Vision and Pattern Recognition · · cited 23× · DOI ↗ · more like this ·

In a search and rescue scenario, an expeditious response is critical since the radius of the search area increases by roughly 3 km per hour while the life expectancy of the lost individual decreases. To find the object of the search as quickly as possible, the incident commander creates an overlay probability map identifying high priority search areas and develops a search plan that allocates search assets to each area to maximize the probability of success. Conventional aerial searches have the ability to cover a large area quickly, but are costly and require highly trained personnel to operate. In this work we present results of a proof of concept Search and Rescue Unmanned Aerial System, ResQuad, that capitalizes on the advances in drone industry while allowing for reduction in cost and retaining the advantages of aerial perspectives. Given the probability map from the search…

Optimum Constant-Gain Filters

Gerald Cook, Donald E. Dawson

Artificial Intelligence · IEEE Transactions on Industrial Electronics and Control Instrumentation · · cited 11× · DOI ↗ · more like this ·

The problem of estimating the state of a linear system over a finite time interval in the presence of noise is considered. The expected value of the integral of the quadratic error is taken as the performance index. A configuration of the same type as the Kaiman filter is assumed with the restriction that the gain must be constant. An integral equation is obtained as a necessary condition for the gain to be optimum, and an iterative procedure is suggested for its solution. Numerical results indicate that this filter can be significantly more accurate than one utilizing the steady-state gain of the Kalman filter.

Identification/Observation Using an Extended Luenberger Observer

M. G. Price, Gerald Cook

Artificial Intelligence · IEEE Transactions on Industrial Electronics · · cited 7× · DOI ↗ · more like this ·

This paper introduces a theory of parameter identification using an extended Luenberger observer. State augmentation is used to represent the unknown parameters, and an extended observer/ identifier is utilized to provide both state reconstruction and parameter identification. Conditions for convergence are established, and conditions are defined for the observability of the augmented system.

Optimum Design of a Position Detection System with a Sinusoidal Perturbation Signal

J.H. Aylor, Edward A. Parrish, Gerald Cook

Computer Networks and Communications · IEEE Transactions on Industrial Electronics and Control Instrumentation · · cited 7× · DOI ↗ · more like this ·

In a paper by McVey and Chen [1] the effect of the amplitude of a sinusoidal perturbtion signal on the accuracy of a position detection system was presented. However, the amplitudes considered were chosen arbitrarily, and no optimum value was specified. This paper presents a method for determining an optimum amplitude for a sinusoidal or, for that matter, any other perturbation signal. In addition, the method may be used to eliminate certain functional forms of a perturbation signal from consideration for a given receptor geometry.

The use of mobile robots for remote sensing and object localization

Saurabh Kansal, Shwetha Jakkidi, Gerald Cook

Computer Vision and Pattern Recognition · · cited 6× · DOI ↗ · more like this ·

This paper describes the methodology and algorithms required for performing remote sensing via a mobile robot. Additionally the means for determining the ground coordinates of any detected object of interest are also presented. Instrumentation for determining the robot position and orientation is complemented by the use of a Kalman Filter. Two kinematic models for a mobile robot are presented, one for a robot steered by turning the front wheels and one for a robot steered by using differential speeds between the left and right wheels. Given that an object of interest has been detected, which may have been accomplished manually or automatically, an algorithm is developed for aiming the boresight of the sensor at this object. This permits a co-aligned ranging laser to be used to determine the distance to the object. A combination of this information along with robot position and attitude…

An intelligent robotics simulator

Gerald Cook, C. Biegl, James F. Springfield +1 more

Computer Vision and Pattern Recognition · · cited 6× · DOI ↗ · more like this ·

An intelligent robotics simulation system is described. The purpose of the robot simulator is to act either as an interactive robot modeling and simulation tool, or as an execution environment for robotics task plans generated by higher-level planners. It provides features for modeling of manipulators, environment configuration, manipulator control, and status reporting. The execution of the plans is performed in a graphics simulation environment and after successful completion the commands can be transmitted to physical robot hardware. The system provides an interactive simulation environment where every command entered by the user is immediately executed and the results are displayed on a graphics screen. From this interactive environment users can change the simulation scenario and operate the robot manipulator models in the system. Advanced features of the simulator that are…

Dynamic modeling and control of nonlinear processes using neural network techniques

Gábor Karsai, Kristinn Andersen, Gerald Cook +1 more

Artificial Intelligence · · cited 5× · DOI ↗ · more like this ·

An adaptive network architecture of nonlinear elements and delay lines is proposed, which can be taught to model the time responses of a nonlinear, multivariable system. The structure has been applied to the modeling and control of a highly coupled multivariable process, namely, gas tungsten arc (GTA) welding. The authors present the architecture, learning algorithm, and experiments which showed the feasibility of the approach, and propose a controller architecture that can regulate a nonlinear, multivariable plant such as GTA welding.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

Multiple-robot programming for coordinated motion, end-effector calibration, and part localization

Gerald Cook, Kristinn Andersen, S. Zein-Sabattou +1 more

Computer Vision and Pattern Recognition · Conference Record of the IEEE Industry Applications Society Annual Meeting · · cited 4× · DOI ↗ · more like this ·

The authors present an algorithmic solution to the problem of programming a redundant multiple-robot system for concurrent motion. Arc welding processes are used as application examples. Specifically, the weld path programming algorithm is illustrated, using the GTAW (gas tungsten arc welding) process as an example and assuming a 6-DOF (six-degree-of-freedom) welding robot and a 2-DOF positioner. The algorithm is designed to simplify, and to some extent automate, the task of programming the robotic mechanisms of the welding workcell. The algorithm treats the multiple robots as a single kinematic mechanism. Redundant joints are used to satisfy constraints imposed by the welding process. Approaches to solving the practical problems of calibration and localization are presented within the framework of the algorithm. Simulation examples for specific tasks are demonstrated and discussed.<…

Identification of linear sampled data systems by transform techniques

W. Butcher, Gerald Cook

Signal Processing · IEEE Transactions on Automatic Control · · cited 4× · DOI ↗ · more like this ·

A technique for application of the popular fast Fourier transform (FFT) to the system identification problem is outlined. Smoothing is obtained inherently in the transform and additionally by redundancy in the data. An iterative technique is discussed for the case of nonzero initial conditions and to avoid problems due to the circular nature of convolutions computed by the discrete Fourier transform (DFT).

Some Practical Limitations on the Use of Perturbation Signals for Resolution Enhancement

Gerald Cook

Computer Vision and Pattern Recognition · IEEE Transactions on Industrial Electronics and Control Instrumentation · · cited 3× · DOI ↗ · more like this ·

The application of a triangular perturbation signal as a means of improving the resolution of quantizers is discussed. The particular problems which occur with digital processing are examined. Inaccuracies caused by discrete sampling, and imprecise triangle wave amplitude are investigated, and relationships which bound the errors caused by these factors are established. These relationships are useful in designing the resolution-enhancement system.

Experimental Verification of Signal Perturbation Applied to the Accuracy of Position Detection

J.J. Stanaway, Gerald Cook

Computer Networks and Communications · IEEE Transactions on Industrial Electronics and Control Instrumentation · · cited 3× · DOI ↗ · more like this ·

Photodiodes and photo transistors are presently being applied to many fields to convert optical signals into electrical signals. One application of these devices is in a position detection system. The accuracy of such a system is limited by nonlinearities due to these devices. Through signal perturbation, a method in which an extra signal of higher frequency is added to the input of the receptor, the nonlinearities can be altered and the accuracy improved. The theory for this technique is well understood; however, very little experimental data have been reported. This method has been experimentally tested and the results have been compared with those predicted by the theory.

Use of Kalman Filtering for Data Resolution Enhancement

Gerald Cook, Young C. Lee

Artificial Intelligence · IEEE Transactions on Industrial Electronics and Control Instrumentation · · cited 2× · DOI ↗ · more like this ·

A method for using Kalman filtering techniques for improving data resolution is presented. The method uses a Taylor series process model which allows one to treat data from a variety of sources. Smoothing can also be included. The potential utility of the method lies in being able to trade off sensor cost versus computer processing. In some cases crude sensors coupled with the estimation techniques may yield as accurate data as would be obtained using more sophisticated sensors.

The singular control problem and approximate solutions

Gerald Cook

Numerical Analysis · IEEE Transactions on Automatic Control · · cited 2× · DOI ↗ · more like this ·

A method is presented which permits the solution of singular control problems by approximating the nonnormal system with a normal system. It is shown that the approximation can be made arbitrarily accurate. The optimal control of the approximate system is then determined and applied to the actual system. Bounds are obtained on the errors in boundary conditions and the degree of suboptimality brought about by the technique. The method is valid for minimum time and minimum fuel problems with linear constant plants. Examples are presented.

Explicit inversion of the Laplace transform by a Jacobi-Gauss quadrature approximation

H. Carr, Gerald Cook

Mathematical Physics · IEEE Transactions on Automatic Control · · cited 2× · DOI ↗ · more like this ·

The method of explicit inversion of the Laplace transform equation previously developed is extended by the use of a Jacobi-Gauss quadrature formula The step response of a second-order system is approximated, and time-domain data are obtained by using the inverse matrix.

Procedures to check the adjoint equations when using the method of steepest ascent

D. deDoes, John A. Schaefer, Byron J. T. Morgan +1 more

Numerical Analysis · IEEE Transactions on Automatic Control · · cited 2× · DOI ↗ · more like this ·

The method of steepest ascent is well documented in the literature [1]. However, its application to problems of high order (over 20) is not straightforward [2]. One problem that arises in the application of the method of steepest ascent, particularly to problems of high order and generally to problems of any order, is the pinpointing of errors in programming or in deriving the adjoint equations. This correspondence presents a systematic method for pinpointing such errors. First, a derivation of equations pertinent to the method of steepest ascent as developed by Bryson et al. [1] is presented. Then checks on the adjoints are followed by an illustrative example of the use of these checks.

Experimental Verification of the Improvement of Resolution When Applying Perturbation Theory to a Quantizer

Gary D. Demas, Atalay Barkana, Gerald Cook

Computer Networks and Communications · IEEE Transactions on Industrial Electronics and Control Instrumentation · · cited 1× · DOI ↗ · more like this ·

It has been proven mathematically that with the application of a triangular perturbation signal quantized characteristics may be perfectly linearized for the ideal case [1], but that certain practical limitations will introduce errors if the signals are processed digitally [2]. In this paper the errors resulting from discrete sampling, imprecise triangular wave amplitude, and finite computer word size are examined experimentally and compared with the bounds established in [2]. In all cases the errors are well within the worst case predicted by the theory indicating that this method of resolution enhancement can be utilized where digital processing is required. The particular application reported here involves improving the resolution of an analog-to-digital converter.

Collision free paths in joint space for robotic manipulator

Xing Yang, Gerald Cook

Computer Vision and Pattern Recognition · · cited 0× · DOI ↗ · more like this ·

The problem of path planning for robotic manipulators in the presence of obstacles is addressed. It is shown that when viewed in joint space rather than in Cartesian space the complex problem becomes significantly simpler. The problem is illustrated by the example of a two-link planar manipulator in the presence of three fixed obstacles in a two-dimensional Cartesian space. >

Inverter switching patterns using a neural network

Mahmoud Kassas, S. Zein Sabbattou, Gerald Cook

Artificial Intelligence · Munich Personal RePEc Archive (Ludwig Maximilian University of Munich) · · cited 0× · DOI ↗ · more like this ·

The authors present a method of switching mode selection for a digital current controller using a neural network. The neural network was trained to act as a vector selector for the inverter. The desired voltage vector was calculated from parameters of the induction motor, stator currents, and electromotive force. The backpropagation technique for training neural networks was used based on input/output data obtained from previous simulation studies. The results show excellent correlation between the output of the neural vector selector and the vector selection based on analytical methods. The neural network approach was faster than the previously used analytical methods, making it possible to increase the switching frequency.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

Graphic simualtion test bed for robotics applications in a workstation environment

James F. Springfield, Atheel Mutammara, Gábor Karsai +3 more

Artificial Intelligence · NASA Technical Reports Server (NASA) · · cited 0× · OpenAlex ↗ · more like this ·

Graphical simulation is a cost-effective solution for developing and testing robots and their control systems. The availability of various high-performance workstations makes these systems feasible. Simulation offers preliminary testing of systems before their actual realizations, and it provides a framework for developing new control and planning algorithms. On the other hand, these simulation systems have to have the capability of incorporating various knowledge-based system components, e.g., task planners, representation formalisms, etc. They also should have an appropriate user interface, which makes possible the creation and control of simulation models. ROBOSIM was developed jointly by MSFC and Vanderbilt University, first in a VAX environment. Recently, the system has been ported to an HP-9000 workstation equipped with an SRX graphics accelerator. The user interface of the system…

Use of KalmanFiltering forDataResolution Enhancement

Gerald Cook

Artificial Intelligence · · cited 0× · OpenAlex ↗ · more like this ·

A methodforusing Kalmanfiltering techniques forim- proving dataresolution ispresented. ThemethodusesaTaylor series process modelwhichallows onetotreat datafromavariety ofsources. Smoothing canalsobeincluded. Thepotential utility of themethod lies inbeing able totrade off sensor cost versus computer processing. Insomecases crudesensors coupled withtheestimation techniques mayyield asaccurate dataaswouldbeobtained using moresophisticated sensors, INTRODU(TIJON W~~HENEVERaperson obtains datathere aregen- erally errors present. Theseerrors mayarise ina variety ofwayssuchasnoisy instruments, quantization, etc.Thispaperisconcerned withmeansofimproving theresolution ofdatathrough digital processing. Ifonecanachieve suchanimprovement thentradeoffs between sensor accuracy anddigital computation canbe considered. Incertain cases itmaycostless totakethe datawithcrude sensors andthenprocess…

Use of a Digital Computer to Determine Correct-Size Compensating Elements for a Prespecified Circuit Configuration

Gerald Cook

Computer Networks and Communications · IEEE Transactions on Industrial Electronics and Control Instrumentation · · cited 0× · DOI ↗ · more like this ·

A straightforward approach to the utilization of digital computers in design is described. The choice of a performance index is discussed as well as the search procedure to be used in seeking the component values which minimize this index. A realistic example of a pressure transducer is presented. The computer is used to choose compensating capacitors for the associated bridge circuitry with the objective of obtaining a linear (voltage versus pressure), temperature-independent response. The results are excellent both in terms of good design and reduction of design effort.