Author

Chen Song

425 papers · 1753–2026

1967peak 31 in 20082026

Frequent co-authors

Papers

showing 1–25 of 425 RSS

Cardiac Scan

Feng Lin, Chen Song, Yan Zhuang +3 more

Information Systems · 4 Oct 2017 · cited 180× · DOI ↗ · more like this ·

Continuous authentication is of great importance to maintain the security level of a system throughout the login session. The goal of this work is to investigate a trustworthy, continuous, and non-contact user authentication approach based on a heart-related biometric that works in a daily-life environment. To this end, we present a novel, continuous authentication system, namely Cardiac Scan, based on geometric and non-volitional features of the cardiac motion. Cardiac motion is an automatic heart deformation caused by self-excitement of the cardiac muscle, which is unique to each user and is difficult (if not impossible) to counterfeit. Cardiac Scan features intrinsic liveness detection, unobtrusiveness, cost-effectiveness, and high usability. We prototype a remote, high-resolution cardiac motion sensing system based on the smart DC-coupled continuous-wave radar. Fiducial-based…

WaveEar

Chenhan Xu, Zhengxiong Li, Hanbin Zhang +5 more

Signal Processing · 12 Jun 2019 · cited 131× · DOI ↗ · more like this ·

Voice-user interface (VUI) has become an integral component in modern personal devices (\textite.g., smartphones, voice assistant) by fundamentally evolving the information sharing between the user and device. Acoustic sensing for VUI is designed to sense all acoustic objects; however, the existing VUI mechanism can only offer low-quality speech sensing. This is due to the audible and inaudible interference from complex ambient noise that limits the performance of VUI by causing denial-of-service (DoS) of user requests. Therefore, it is of paramount importance to enable noise-resistant speech sensing in VUI for executing critical tasks with superior efficiency and precision in robust environments. To this end, we investigate the feasibility of employing radio-frequency signals, such as millimeter wave (mmWave) for sensing the noise-resistant voice of an individual. We first perform an…

My Smartphone Knows What You Print

Chen Song, Feng Lin, Zhongjie Ba +3 more

Hardware and Architecture · 24 Oct 2016 · cited 104× · DOI ↗ · more like this ·

Additive manufacturing, also known as 3D printing, has been increasingly applied to fabricate highly intellectual property (IP) sensitive products. However, the related IP protection issues in 3D printers are still largely underexplored. On the other hand, smartphones are equipped with rich onboard sensors and have been applied to pervasive mobile surveillance in many applications. These facts raise one critical question: is it possible that smartphones access the side-channel signals of 3D printer and then hack the IP information? To answer this, we perform an end-to-end study on exploring smartphone-based side-channel attacks against 3D printers. Specifically, we formulate the problem of the IP side-channel attack in 3D printing. Then, we investigate the possible acoustic and magnetic side-channel attacks using the smartphone built-in sensors. Moreover, we explore a magnetic-enhanced…

VocalPrint

Huining Li, Chenhan Xu, Aditya Singh Rathore +8 more

Signal Processing · 16 Nov 2020 · cited 78× · DOI ↗ · more like this ·

With the continuing growth of voice-controlled devices, voice metrics have been widely used for user identification. However, voice biometrics is vulnerable to replay attacks and ambient noise. We identify that the fundamental vulnerability in voice biometrics is rooted in its indirect sensing modality (e.g., microphone). In this paper, we present VocalPrint, a resilient mmWave interrogation system which directly captures and analyzes the vocal vibrations for user authentication. Specifically, VocalPrint exploits the unique disturbance of the skin-reflect radio frequency (RF) signals around the near-throat region of the user, caused by the vocal vibrations during communication. The complex ambient noise is isolated from the RF signal using a novel resilience-aware clutter suppression approach for preserving fine-grained vocal biometric properties. Afterward, we extract the…

EyeVeri: A secure and usable approach for smartphone user authentication

Chen Song, Aosen Wang, Kui Ren +1 more

Information Systems · April 2016 · cited 68× · DOI ↗ · more like this ·

As mobile technology grows rapidly, the smartphone has become indispensable for transmitting private user data, storing the sensitive corporate files, and conducting secure payment transactions. However, with mobile security research lagging, smartphones are extremely vulnerable to unauthenticated access. In this paper, we present, EyeVeri, a novel eye-movement-based authentication system for smartphone security protection. Specifically, EyeVeri tracks human eye movement through the built-in front camera and applies the signal processing and pattern matching techniques to explore volitional and non-volitional gaze patterns for access authentication. Through a comprehensive user study, EyeVeri performs well and is a promising approach for smartphone user authentication. We also discuss the evaluation results in-depth and analyze opportunities for future work.

OcuLock: Exploring Human Visual System for Authentication in Virtual Reality Head-mounted Display

Shiqing Luo, Anh Nguyen, Chen Song +3 more

Information Systems · 2020 · cited 67× · DOI ↗ · more like this ·

The increasing popularity of virtual reality (VR) in a wide spectrum of applications has generated sensitive personal data such as medical records and credit card information. While protecting such data from unauthorized access is critical, directly applying traditional authentication methods (e.g., PIN) through new VR input modalities such as remote controllers and head navigation would cause security issues. The authentication action can be purposefully observed by attackers to infer the authentication input. Unlike any other mobile devices, VR presents immersive experience via a head-mounted display (HMD) that fully covers users' eye area without public exposure. Leveraging this feature, we explore human visual system (HVS) as a novel biometric authentication tailored for VR platforms. While previous works used eye globe movement (gaze) to authenticate smartphones or PCs, they suffer…

Detecting Any Human-Object Interaction Relationship: Universal HOI Detector with Spatial Prompt Learning on Foundation Models

Yichao Cao, Qingfei Tang, Xiu Su +4 more

cs.CV · 7 Nov 2023 · cited 64× · arXiv ↗ · more like this ·

Human-object interaction (HOI) detection aims to comprehend the intricate relationships between humans and objects, predicting $<human, action, object>$ triplets, and serving as the foundation for numerous computer vision tasks. The complexity and diversity of human-object interactions in the real world, however, pose significant challenges for both annotation and recognition, particularly in recognizing interactions within an open world context. This study explores the universal interaction recognition in an open-world setting through the use of Vision-Language (VL) foundation models and large language models (LLMs). The proposed method is dubbed as \emph{\textbf{UniHOI}}. We conduct a deep analysis of the three hierarchical features inherent in visual HOI detectors and propose a method for high-level relation extraction aimed at VL foundation models, which we call HO prompt-based…

A Simple Model for Portable and Fast Prediction of Execution Time and Power Consumption of GPU Kernels

Lorenz Braun, Sotirios Nikas, Chen Song +2 more

cs.DC · January 2020 · cited 57× · arXiv ↗ · more like this ·

Characterizing compute kernel execution behavior on GPUs for efficient task scheduling is a non-trivial task. We address this with a simple model enabling portable and fast predictions among different GPUs using only hardware-independent features. This model is built based on random forests using 189 individual compute kernels from benchmarks such as Parboil, Rodinia, Polybench-GPU and SHOC. Evaluation of the model performance using cross-validation yields a median Mean Average Percentage Error (MAPE) of 8.86-52.00% and 1.84-2.94%, for time respectively power prediction across five different GPUs, while latency for a single prediction varies between 15 and 108 milliseconds.

PrinTracker

Zhengxiong Li, Aditya Singh Rathore, Chen Song +3 more

Computer Vision and Pattern Recognition · 15 Oct 2018 · cited 47× · DOI ↗ · more like this ·

As 3D printing technology begins to outpace traditional manufacturing, malicious users increasingly have sought to leverage this widely accessible platform to produce unlawful tools for criminal activities. Therefore, it is of paramount importance to identify the origin of unlawful 3D printed products using digital forensics. Traditional countermeasures, including information embedding or watermarking, rely on supervised manufacturing process and are impractical for identifying the origin of 3D printed tools in criminal applications. We argue that 3D printers possess unique fingerprints, which arise from hardware imperfections during the manufacturing process, causing discrepancies in the line formation of printed physical objects. These variations appear repeatedly and result in unique textures that can serve as a viable fingerprint on associated 3D printed products. To address the…

E-CIR: Event-Enhanced Continuous Intensity Recovery

Chen Song, Qixing Huang, Chandrajit Bajaj

eess.IV · 3 Mar 2022 · cited 41× · arXiv ↗ · more like this ·

A camera begins to sense light the moment we press the shutter button. During the exposure interval, relative motion between the scene and the camera causes motion blur, a common undesirable visual artifact. This paper presents E-CIR, which converts a blurry image into a sharp video represented as a parametric function from time to intensity. E-CIR leverages events as an auxiliary input. We discuss how to exploit the temporal event structure to construct the parametric bases. We demonstrate how to train a deep learning model to predict the function coefficients. To improve the appearance consistency, we further introduce a refinement module to propagate visual features among consecutive frames. Compared to state-of-the-art event-enhanced deblurring approaches, E-CIR generates smoother and more realistic results. The implementation of E-CIR is available at…

VocalPrint: A mmWave-Based Unmediated Vocal Sensing System for Secure Authentication

Huining Li, Chenhan Xu, Aditya Singh Rathore +8 more

Signal Processing · IEEE Transactions on Mobile Computing · 31 May 2021 · cited 33× · DOI ↗ · more like this ·

With the continuing growth of voice-controlled devices, voice metrics have been widely used for user identification. However, voice biometrics is vulnerable to replay attacks and ambient noise. We identify that the fundamental vulnerability in voice biometrics is rooted in its indirect sensing modality (e.g., microphone). In this paper, we present <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">VocalPrint</i> , a resilient mmWave interrogation system which directly captures and analyzes the vocal vibrations for user authentication. Specifically, <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">VocalPrint</i> exploits the unique disturbance of the skin-reflect radio frequency (RF) signals around the near-throat region of the user, caused by the vocal vibrations. The complex ambient noise is…

Social Network Based Recommendation Systems: A Short Survey

Chen Song, Samuel Owusu, Lina Zhou

Information Systems · September 2013 · cited 31× · DOI ↗ · more like this ·

This paper examines the background of the recommender systems and the state-of-art technologies in this current research area. We examined the needs for recommendation systems and the enhanced performance by using the additional social network information. We compared different types of social network information and how they are used to improve the recommendation systems with a few examples. We also discussed different evaluation methods that are important to measure the performances of a recommendation system. We concluded that the recommendation system is a very important research area and could be applied in many domains. We summarized different measures towards evaluating a recommendation system especially those incorporating the social network information.

Locally subcube-connected hypercube networks: theoretical analysis and experimental results

Jianer Chen, Guojun Wang, Chen Song-qiao

Computer Networks and Communications · IEEE Transactions on Computers · May 2002 · cited 29× · DOI ↗ · more like this ·

We study hypercube networks with a very large number of faulty nodes. A simple and natural condition, the local subcube-connectivity, is identified under which hypercube networks with a very large number of faulty nodes still remain connected. The condition of local subcube-connectivity can be detected and maintained in a distributed manner based on localized management. Efficient routing algorithms on locally subcube-connected hypercube networks are developed. Our algorithms are distributed and local-information-based in the sense that each node in the network knows only its neighbors' status and no global information of the network is required by the algorithms. For a locally subcube-connected hypercube network that may contain up to 37.5 percent faulty nodes, our algorithms run in linear time and, for any two given nonfaulty nodes, find a routing path of length bounded by four times…

Deep Anomaly Detection on Tennessee Eastman Process Data

Fabian Hartung, Billy Joe Franks, Tobias Michels +15 more

cs.LG · 10 Mar 2023 · cited 27× · arXiv ↗ · more like this ·

This paper provides the first comprehensive evaluation and analysis of modern (deep-learning) unsupervised anomaly detection methods for chemical process data. We focus on the Tennessee Eastman process dataset, which has been a standard litmus test to benchmark anomaly detection methods for nearly three decades. Our extensive study will facilitate choosing appropriate anomaly detection methods in industrial applications.

Where do you live and what do you drive: Built-environmental and spatial effects on vehicle type choice and vehicle use

Na Chen, Gulsah Akar, Steven I. Gordon +1 more

Transportation · International Journal of Sustainable Transportation · 15 May 2020 · cited 27× · DOI ↗ · more like this ·

The carbon footprint of daily travel for an individual household is based on the types of vehicles that the household owns, their fuel efficiency, and the number of miles traveled (Federal Highway Administration, 2009 Federal Highway Administration. (2009). The “carbon footprint” of daily travel. NHTS Brief, U.S. Department of Transportation. https://nhts.ornl.gov/briefs/Carbon%20Footprint%20of%20Travel.pdf. [Google Scholar]). Therefore, the types and usage of vehicles a household owns are informational to overall sustainable planning. This study develops a multinomial logit model for vehicle type choice and a spatial autoregressive (SAR) model for vehicle use for Ohio households using the most recent Household Travel Survey (HTS) collected in the Cincinnati metropolitan area. The developed vehicle choice model identifies the effects of the built environment characteristics on vehicle…

A randomized QoS routing algorithm on networks with inaccurate link-state information

Wang Jian-xin, Wang Wei-ping, Chen Jianer +1 more

Computer Networks and Communications · 7 Nov 2002 · cited 27× · DOI ↗ · more like this ·

The quality of network services is directly affected by QoS routing algorithms, and QoS routing algorithms rely heavily on network state information specifying the resource availability at network nodes and links. In practice, the network state information is not always accurate because it does not update in time. This paper proposes a randomized QoS routing algorithm on networks with inaccurate link-state information, and develops a simulation environment. Our algorithm reduces computational cost and protocol overhead. Experimental tests demonstrate that our algorithm performs very well in practice.

Multiscale Hybrid-Mixed Finite Element Method for Flow Simulation in Fractured Porous Media

Philippe R.B. Devloo, Wenchao Teng, Chen-Song Zhang

Computational Theory and Mathematics · Computer Modeling in Engineering & Sciences · 2019 · cited 24× · DOI ↗ · more like this ·

The multiscale hybrid-mixed (MHM) method is applied to the numerical approximation of two-dimensional matrix fluid flow in porous media with fractures. The two-dimensional fluid flow in the reservoir and the one-dimensional f... | Find, read and cite all the research you need on Tech Science Press

SSL++: Improving Self-Supervised Learning by Mitigating the Proxy Task-Specificity Problem

Chen Song, Jing‐Hao Xue, Jianlong Chang +3 more

Artificial Intelligence · IEEE Transactions on Image Processing · 21 Dec 2021 · cited 23× · DOI ↗ · more like this ·

The success of deep convolutional networks (ConvNets) generally relies on a massive amount of well-labeled data, which is labor-intensive and time-consuming to collect and annotate in many scenarios. To eliminate such limitation, self-supervised learning (SSL) is recently proposed. Specifically, by solving a pre-designed proxy task, SSL is capable of capturing general-purpose features without requiring human supervision. Existing efforts focus obsessively on designing a particular proxy task but ignore the semanticity of samples that are advantageous to downstream tasks, resulting in the inherent limitation that the learned features are specific to the proxy task, namely the proxy task-specificity of features. In this work, to improve the generalizability of features learned by existing SSL methods, we present a novel self-supervised framework SSL++ to incorporate the proxy…

Ant System Based Anycast Routing in Wireless Sensor Networks

Luo Juan, Chen Song, Chao Zhou

Computer Networks and Communications · September 2007 · cited 20× · DOI ↗ · more like this ·

Anycast is a mechanism that it sends the data groups to the nearest interface during which they have the same anycast address. Ant colony system, a population-based algorithm, provides natural and intrinsic way of exploration of search space in optimization settings in determining optimal anycast tree. In this paper, we propose a sink selection heuristic algorithm called Minimum Ant-based Data Fusion Tree(MADFT) for energy constraint wireless sensor networks. Different from existing schemes, MADAT not only optimizes over the data transmission cost, but also incorporates the cost for data fusion which can be significant for emerging sensor networks with vectorial data and/or security requirements. Via simulation, it is shown that this algorithm has excellent performance behavior and provides a near-optimal solution.

Exploring Eye Adaptation in Head-Mounted Display for Energy Efficient Smartphone Virtual Reality

Zhisheng Yan, Chen Song, Feng Lin +1 more

Computer Vision and Pattern Recognition · February 2018 · cited 19× · DOI ↗ · more like this ·

Smartphone virtual reality (VR) can offer immersive experience while being affordable and easy to use. To enhance the VR experience under limited smartphone computation and battery resources, solutions have been proposed for efficient rendering and content delivery. However, efforts towards optimizing the distinct head-mounted display (HMD) are unfortunately limited. This paper unveils the opportunity of optimizing smartphone VR by leveraging human vision in HMD. In particular, we shift the default fixed full brightness in VR video/game Apps to a dark adaptation based dynamically scaled brightness. By exploiting the time-varying sensitivity of human eyes in dark HMD, we can reduce VR display energy while maintaining brightness perception. The proposed system, Strix, is empowered by a dark adaptation model trained from classic experimental data, a varying trend of perceptual full…

An Energy-Efficient DSR Routing Protocol Based on Mobility Prediction

Yuhong Luo, Jianxin Wang, Chen Song-qiao

Computer Networks and Communications · 21 Jul 2006 · cited 19× · DOI ↗ · more like this ·

Reducing networks energy consumption and extending nodes lifetime are two important issues in mobile ad hoc networks (MANET). This paper proposes a route selection mechanisms based on energy-efficient. An E-DSR routing protocol is also proposed, which combined with the new route selection mechanisms and mobility prediction. The simulation results show that the E-DSR protocol can extend the lifetime of node and enhance the efficiencies of the data forwarding.

A pilot study of Global ICT strategy applications in sustainable continuing education

Bin Hu, Sohail M. Noman, Muhammad Irshad +4 more

Information Systems · Procedia Computer Science · 2021 · cited 16× · DOI ↗ · more like this ·

In the area of continuing education, computer network has been an important part of people’s lives in the growth and advancement of quality education. This challenge explores the function of the information system in sustaining technology workers for social and economic growth in human communities worldwide and analyzes computer network applications and major features of continuing education. Continuing education is anticipated to employ the usage of other new wireless technologies in the immediate future, through the use of modern cell technology, smartphones or related products. However, this does not sideline the use of the simple computer network to support information, as ever less developed countries also keep up with today’s and future sophisticated technology in e-education, especially ongoing education for working people and adults, without leaving their own offices or homes.…

My Smartphone Recognizes Genuine QR Codes!

Chen Song, Zhengxiong Li, Wenyao Xu +3 more

Information Systems · Proceedings of the ACM on Interactive Mobile Wearable and Ubiquitous Technologies · 5 Jul 2018 · cited 16× · DOI ↗ · more like this ·

Additive manufacturing, or 3D printing, has been widely applied in product manufacturing. However, the emerging unauthorized access of 3D printing data, as well as the growth in the pervasiveness and capability of 3D printing devices have raised serious concerns about 3D printing product anti-counterfeit. Electronic product tags are the current standard for authentication purposes; however, often this technology is neither secure nor cost-effective, and fails to take advantage of other unique 3D printing features. Considering the great usability of the QR code, we are motivated to enhance the QR code for the practical and cost-effective 3D printing product identification. Particularly, we bring up the all-in-one design, all-in-one manufacturing concept incorporating the QR code in the complete 3D printing paradigm. In detail, we explore the possibility of leveraging the random and…

PFED: A Prediction-Based Fair Active Queue Management Algorithm

Wenyu Gao, Jianxin Wang, Jianer Chen +1 more

Computer Networks and Communications · 3 Aug 2005 · cited 16× · DOI ↗ · more like this ·

In this paper, we propose a novel active queue management algorithm PFED, which is based on network traffic prediction. The main properties of PFED are: (1) stabilizing queue length at a desirable level with consideration of future traffic, and using a MMSE (minimum mean square error) predictor to predict future network traffic; (2) imposing effective punishment upon misbehaving flow with a full stateless method; (3) maintaining queue arrival rate bounded by queue service rate through more reasonable calculation of packet drop probability. To verify the performance of PFED, PFED is implemented in NS2 and is compared with RED and CHOKe with respect to different performance metrics. Simulation results show that PFED outperforms RED and CHOKe in stabling instantaneous queue length and in fairness. It is also shown that PFED enables the link capacity to be fully utilized by stabilizing the…

Dynamic query sliders vs. brushing histograms

Qin Li, Xiaofeng Bao, Chen Song +2 more

Computer Vision and Pattern Recognition · 2003 · cited 16× · DOI ↗ · more like this ·

Dynamic queries facilitate exploration of information through real-time visual display of both query formulation and results. Dynamic query sliders are linked to the main visualization to filter data. A common alternative to dynamic queries is to link several simple visualizations, such as histograms, to the main visualization with a brushing interaction. Selecting data in the histograms highlights that data in the main visualization. We compare these two approaches in an empirical experiment on DynaMaps, a geographic data visualization tool. Dynamic query sliders resulted in better performance for simple range tasks, while brushing histograms was better for complex comparison, tradeoff, and pattern tasks. Participants preferred brushing histograms for understanding relationships between attributes.