arXiv.itsnick.co

an independent field guide to 23 million papers from arXiv & OpenAlex — not affiliated with arXiv.org

Author

B. Mercey

28 papers · 2000–2026

2000: 22001: 32002: 32003: 12004: 42005: 22006: 32007: 32008: 22009: 12010: 02011: 02012: 02013: 02014: 22015: 02016: 02017: 02018: 12019: 02020: 02021: 02022: 02023: 02024: 02025: 02026: 1
2000peak 4 in 20042026

Frequent co-authors

Papers

showing 1–25 of 28 RSS

Thickness-dependence of the electronic properties in V2O3 thin films

C. Grygiel, Ch. Simon, B. Mercey +3 more

cond-mat.str-el · · cited 45× · arXiv ↗ · more like this ·

High quality vanadium sesquioxide V2O3 films (170-1100 Å) were grown using the pulsed laser deposition technique on (0001)-oriented sapphire substrates, and the effects of film thickness on the lattice strain and electronic properties were examined. X-ray diffraction indicates that there is an in-plane compressive lattice parameter (a), close to -3.5% with respect to the substrate and an out-of-plane tensile lattice parameter (c) . The thin film samples display metallic character between 2-300 K, and no metal-to-insulator transition is observed. At low temperature, the V2O3 films behave as a strongly correlated metal, and the resistivity (ρ) follows the equation ρ=ρ_0 + A T^2, where A is the transport coefficient in a Fermi liquid. Typical values of A have been calculated to be 0.14 μΩcm K^{-2}, which is in agreement with the coefficient reported for V2O3 single crystals under high…

Magnetic order in epitaxial (La2/3Sr1/3MnO3)3/(BaTiO3)3 trilayer heterostructures

E. Rebolini, H. Himanshu, K. Beauvois +6 more

cond-mat.mtrl-sci · · cited 0× · arXiv ↗ · more like this ·

The realization of artificial magnetic structures with high epitaxial quality and elevated critical temperatures remains a key challenge for spintronics. Here, we report the fabrication and characterization of epitaxial (La2/3Sr1/3MnO3)3/(BaTiO3)3 trilayer heterostructures grown by layer-by-layer laser ablation. High-resolution transmission electron microscopy, magnetization measurements, and neutron diffraction confirm their exceptional crystalline order and the absence of structural defects. Neutron diffraction reveals no antiferromagnetic at non-zero wavevector Bragg peaks, ruling out most antiferromagnetic configurations with a non zero wave vector Q. Magnetic hysteresis loops instead evidence a ferromagnetic order with a remanent moment of about 0.5 Bohr magneton per Mn atom at room temperature, persisting either in-plane or out-of-plane depending on the applied field. Our findings…

Resonant photoemission with circular polarized light on magnetized LSMO

M. C. Richter, O. Heckmann, B. S. Mun +3 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

We have used resonant photoemission with circular polarized light as a new tool to obtain information about the electronic structure of half-metals. After careful sample surface preparation of La0.7Sr0.3MnO3, we have obtained a dichroic signal for the L2,3 absorption of Mn. Working with a magnetized sample and circular polarized light we observe a clear effect of the helicity of light on the position of the resonant Raman-Auger photoelectrons from the Mn 2p3p3d decay. These results allow us to achieve a rough estimate of the half-metallic spin half-gap.

Structural characterization of PrVO3 epitaxial thin films

O. Copie, H. Rotella, P. Boullay +8 more

physics.chem-ph · · arXiv ↗ · more like this ·

Rare earth perovskite oxides constitute a wide family of materials presenting functional proper- ties strongly coupled to their crystalline structure. Here, we report on the experimental results on epitaxial PrVO3 deposited on SrTiO3 single crystal substrates by pulsed laser deposition. By com- bining advanced structural characterization tools, we have observed that the PVO unrelaxed film structure grown on STO, is characterized by two kinds of oriented domains whose epitaxial relations are: (i) PrVO3[110]o//SrTiO3[001]c and PrVO3[001]o//SrTiO3[100]c, (ii) PrVO3[110]o//SrTiO3[001]c and PrVO3[001]o//SrTiO3[010]c. We have also measured reciprocal space maps. From these results, we have determined that the PVO film epitaxy on STO imposes a lowering of the PVO structure symmetry from orthorhombic (Pbnm) to monoclinic (P21/m). We show, the nominal strain induced by the substrate being…

Structural analysis of strained LaVO$_3$ thin films

H. Rotella, O. Copie, G. Mouillard-Steciuk +10 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

While structure refinement is routinely achieved for simple bulk materials, the accurate structural determination still poses challenges for thin films due on the one hand to the small amount of material deposited on the thicker substrate and, on the other hand, to the intricate epitaxial relationships that substantially complicate standard X-ray diffraction analysis. Using a combined approach, we analyze the crystal structure of epitaxial LaVO$_3$ thin films grown on (100)-oriented SrTiO$_3$. Transmission electron microscopy study reveals that the thin films are epitaxially grown on SrTiO$_3$ and points to the presence of 90$^{\circ}$ oriented domains. The mapping of the reciprocal space obtained by high resolution X-ray diffraction permits refinement of the lattice parameters. We finally deduce that strain accommodation imposes a monoclinic structure onto the LaVO$_3$ film. The…

Structure determination of a brownmillerite Ca2Co2O5 thin film by Precession Electron Diffraction

P. Boullay, V. Dorcet, O. Perez +4 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

Calcium cobaltite thin films with a ratio Ca/Co=1 were grown on (101)-NdGaO3 substrate by the pulsed laser deposition technique. The structure of the deposited metastable phase is solved using a precession electron diffraction 3D dataset recorded from a cross-sectional sample. It is shown that an ordered oxygen-deficient Ca2Co2O5+d perovskite of the brownmillerite-type with lattice parameters a= 0.546nm, b=1.488nm and c=0.546nm (SG: Ibm2) has been stabilized using the substrate induced strain. The structure and microstructure of this metastable cobaltite is further discussed and compared to related bulk materials based on our transmission electron microscopy investigations

Hysteresis in the electronic transport of V2O3 thin films: non-exponential kinetics and range scale of phase coexistence

C. Grygiel, A. Pautrat, W. Prellier +1 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

The thermal hysteresis of the electronic transport properties were studied for V2O3 thin films. The temporal evolution of the resistance shows the out-of-equilibrium nature of this hysteresis with a very slow relaxation. Partial cycles reveal not only a behavior consistent with phase coexistence, but also the presence of spinodal temperatures which are largely separated. The temperature spreading of phase coexistence is consistent with the bulk phase diagram in the pressure-temperature plane, confirming that the film is effectively under an effective pressure induced by the substrate.

Mesoscopic electronic heterogeneities in the transport properties of V2O3 thin films

C. Grygiel, A. Pautrat, W. C. Sheets +3 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

The spectacular metal-to-insulator transition of V2O3 can be progressively suppressed in thin film samples. Evidence for phase separation was observed using microbridges as a mesoscopic probe of transport properties where the same film possesses domains that exhibit a metal-to-insulator transition with clear first order features or remain metallic down to low temperatures. A simple model consisting of two parallel resistors can be used to quantify a phase coexistence scenario explaining the measured macroscopic transport properties. The interaction between film and substrate is the most plausible candidate to explain this extended phase coexistence as shown by a correlation between the transport properties and the structural data.

Effect of charge modulation in (LaVO3)m(SrVO3)n superlattices on the insulator-metal transition

W. C Sheets, B. Mercey, W. Prellier

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

A series of epitaxial (LaVO3)6m(SrVO3)m superlattices having the same nominal composition as La6/7Sr1/7VO3, a Mott-Hubbard insulator, were grown with pulsed-laser deposition on [001]-oriented SrTiO3 substrates, and their superlattice period was varied. When m=1, the insulating resistivity of bulk-like La6/7Sr1/7VO3 is obtained; however, an increase in the periodicity (m>=2) results in metallic samples. Comparison of the superlattice periodicity with the coherence length of charge carriers in perovskite oxide heterostructures are used to understand these observations. A filling-controlled insulator-metal transition was induced by placing a single dopant layer of SrVO3 within LaVO3 layers of varying thickness.

Absence of long-range Ni/Mn ordering in ferromagnetic La2NiMnO6 thin films

M. P. Singh, C. Grygiel, W. C. Sheets +6 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

Epitaxial La2NiMnO6 thin films have been grown on (001)-oriented SrTiO3 using the PLD technique. The thin films are semiconducting and FM with a TC close to 270K, a coercive field of 920Oe, and a saturation magnetization of 5muB per f.u. TEM, conducted at RT, reveals a majority phase having "I-centered" structure with a=c=1.4asub and b=2asub along with a minority phase-domains having "P-type" structure (asub being the lattice parameter of the perovskite structure). A discusion on the presence of Ni/Mn long-range ordering, in light of recent literature on double perovskites La2NiMnO6 is presented.

Domain wall magnetoresistance in a nanopatterned La(2/3)Sr(1/3)MnO3 track

T. Arnal, A. V. Khvalokvskii, M. Bibes +3 more

cond-mat.str-el · · arXiv ↗ · more like this ·

We have measured the contribution of magnetic domain walls (DWs) to the electric resistance in epitaxial manganite films patterned by electron-beam lithography into a track containing a set of notches. We find a DW resistance-area (RA) product of ~2.5 10^(-13) Ohm/m^2 at low temperature and bias, which is several orders of magnitude larger than the values reported for 3d ferromagnets. However, the current-voltage characteristics are highly linear which indicates that the DWs are not phase separated but metallic. The DWRA is found to increase upon increasing the injected current, presumably reflecting some deformation of the wall by spin-transfer. When increasing temperature, the DWRA vanishes at ~225K which is likely related to the temperature dependence of the film anisotropy.

Strain induced pressure effect in pulsed laser deposited thin films of the strongly correlated oxide V2O3

S. Autier-Laurent, B. Mercey, D. Chippaux +2 more

cond-mat.str-el · · arXiv ↗ · more like this ·

V2O3 thin films about 10 nm thick were grown on Al2O3 (0001) by pulsed laser deposition. The XRD analysis is in agreement with R-3c space group. Some of them exhibit the metal / insulator transition characteristic of V2O3 bulk material and others samples exhibit a metallic behavior. For the latter, the XPS analysis indicates an oxidation state of +III for vanadium. There is no metal / insulator transition around 150 K in this sample and a strongly correlated Fermi liquid rho = AT2 behavior of the resistivity at low temperature is observed, with a value of A of 1.2 10-4 ohm cm, 3 times larger than the bulk value at 25 kbar.

Influence of the microstructure on the magnetism of Co-doped ZnO thin films

A. Fouchet, W. Prellier, B. Mercey

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

The prediction of ferromagnetism at room temperature in Co-ZnO thin films has generated a large interest in the community due to the possible applications. However, the results are controversial, going from ferromagnetism to non-ferromagnetism, leading to a large debate about its origin (secondary phase, Co clusters or not). By carefully studying the micro-structure of various Co-ZnO films, we show that the Co2+ partly substitutes the ZnO wurtzite matrix without forming Co clusters. Surprisingly, the ferromagnetism nature of the films disappears as the Co content increases. In addition, our results suggest that the observed ferromagnetism is likely associated to a large amount of defects- close to the interface and strongly depending on the growth temperature- which may explained the spreading of the results.

Stress deformations and structural quenching in Sm0.5Ca0.5MnO3 thin films allow a huge decrease of the charge order melting magnetic field

E. Rauwel, W. Prellier, B. Mercey +2 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

Thin films of Sm0.5Ca0.5MnO3 manganites with charge ordering (CO) properties and colossal magnetoresistance were synthesized by pulsed laser deposition technique on (100)-SrTiO3 and (100)-LaAlO3 substrates. We first compare the structural modifications as function of the substrate and film thickness. Secondly, measuring transport properties in magnetic fields up to 24T, we establish the temperature-field phase diagram describing the stability of the CO state and compare it to bulk material. We show that some structural modification induced by the substrate occurs and that the CO melting magnetic field is greatly reduced. Moreover, with the temperature decrease, no modification of the lattice parameters is observed. We then propose an explanation based on the quenching of the unit cell of the film that adopts the in-plane lattice parameters of the substrate and thus, prevents the…

The role of ferroelectric-ferromagnetic layers on the properties of superlattice-based multiferroics

P. Murugavel, M. P. Singh, W. Prellier +3 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

A series of superlattices and trilayers composed of ferromagnetic and ferroelectric or paraelectric layers were grown on (100) SrTiO3 by the pulsed laser deposition technique. Their structural and magneto-electric properties were examined. The superlattices made of ferromagnetic Pr0.85Ca0.15MnO3 (PCMO) and a ferroelectric, namely Ba0.6Sr0.4TiO3 (BST) or BaTiO3, showed enhanced magnetoresistance (MR) at high applied magnetic field, whereas such enhancement was absent in Pr0.85Ca0.15MnO3/SrTiO3 superlattices, which clearly demonstrates the preponderant role of the ferroelectric layers in this enhanced MR. Furthermore, the absence of enhanced MR in trilayers of PCMO/BST indicates that the magneto-electric coupling which is responsible for MR in these systems is stronger in multilayers than in their trilayer counterparts.

Interfacial strain measurements in $SrRuO_3/SrMnO_3$ magnetic multilayers

P. Padhan, W. Prellier, B. Mercey

cond-mat.str-el · · arXiv ↗ · more like this ·

Magnetic multilayers of $(SrRuO_3)_m(SrMnO_3)_n$ were grown artificially using the pulsed laser deposition technique on (001)-oriented $SrTiO_3$ substrates. The state of strain at the interfaces and the structural coherency are studied in details utilizing asymmetrical $X$-ray diffraction and the $\sin ^2ψ$ method. First, the evolution of the lattice parameters, the crystallinity and the epitaxy of the films are evaluated as a function of the number of $SrMnO_3$ unit cells using $X$-rays diffraction and transmission electron microscopy. Second, our results on the stress indicate that the $SrRuO_3/SrMnO_3$ superlattices show a larger residual strain as compared to the single layer film of $SrRuO_3$. This suggests that the lattice stiffening from interfacial strain and inhibiting the dislocation by composition modulation. Finally, these results bring insights on the interfacial stress…

Investigation of laser ablated ZnO thin films grown with Zn metal target: a structural study

A. Fouchet, W. Prellier, B. Mercey +3 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

High quality ZnO thin films were gown using the pulsed laser deposition technique on (0001) Al$_2$O$_3$ substrates in an oxidizing atmosphere, using a Zn metallic target. We varied the growth conditions such as the deposition temperature and the oxygen pressure. First, using a battery of techniques such as x-rays diffraction, Rutherford Backscattering spectroscopy and atomic force microscopy, we evaluated the structural quality, the stress and the degree of epitaxy of the films. Second, the relations between the deposition conditions and the structural properties, that are directly related to the nature of the thin films, are discussed qualitatively. Finally, a number of issues on how to get good-quality ZnO films are addressed.

Structural and magnetic properties of a series of low doped Zn$_{1-x}$Co$_x$O thin films deposited from Zn and Co metal targets on (0001) Al$_2$O$_3$ substrates

A. Fouchet, W. Prellier, P. Padhan +4 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

We report on the synthesis of low doping Zn$_{1-x}$Co$_x$O ($0<x<0.1$) thin films on (0001)-Al$_2$O$_3$ substrates. The films were prepared in an oxidizing atmosphere, using the pulsed laser deposition technique starting from Zn and Co metallic targets. We first studied the influence of the strains of ZnO and their stuctural properties. Second, we have investigated the structural and the magnetic properties of the Zn$_{1-x}$Co$_x$O films. We show that at low doping, the lattice parameters and the magnetization of the Zn$_{1-x}$Co$_x$O films depend strongly on the Co concentration.

Laser ablation of Co:ZnO films deposited from Zn and Co metal targets on (0001) Al$_2$O$_3$ substrates

W. Prellier, A. Fouchet, B. Mercey +2 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

We report on the synthesis of high-quality Co-doped ZnO thin films using the pulsed laser deposition technique on (0001)-Al$_2$O$_3$ substrates performed in an oxidizing atmosphere, using Zn and Co metallic targets. We firstly optimized the growth of ZnO in order to obtain the less strained film. Highly crystallized Co:ZnO thin films are obtained by an alternative deposition from Zn and Co metal targets. This procedure allows an homogenous repartition of the Co in the ZnO wurzite structure which is confirmed by the linear dependance of the out-of-plane lattice parameter as a function of the Co dopant. In the case of 5% Co doped, the film exhibits ferromagnetism with a Curie temperature close to the room temperature.

High magnetic field transport measurement of charge-ordered Pr$_{0.5}$Ca$_{0.5}$MnO$_3$ strained thin films

W. Prellier, E. Rauwel Buzin, S. de Brion +3 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

We have investigated the magnetic-field-induced phase transition of charge-ordered (CO) Pr$_{0.5}$Ca$_{0.5}$MnO$_3$ thin films, deposited onto (100)-oriented LaAlO$_3$ and (100)-oriented SrTiO$_3$ substrates using the pulsed laser deposition technique, by measuring the transport properties with magnetic fields up to 22T. The transition to a metallic state is observed on both substrates by application of a critical magnetic field ($H_C>10T$ at 60K). The value of the field required to destroy the charge-ordered insulating state, lower than the bulk compound, depends on both the substrate and the thickness of the film. The difference of the critical magnetic field between the films and the bulk material is explained by the difference of in-plane parameters at low temperature (below the CO transition). Finally, these results confirm that the robustness of the CO state, depends mainly on the…

Epitaxial Growth of La$_{1/3}$Sr$_{2/3}$FeO$_3$ thin films by laser ablation

W. Prellier, B. Mercey

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

We report on the synthesis of high quality La$_{1/3}$Sr$_{2/3}$FeO$_3$ (LSFO) thin films using the pulsed laser deposition technique on both SrTiO$_3$ (STO) and LaAlO$_3$ (LAO) substrates (100)-oriented. From X-Ray diffraction (XRD) studies, we find that the films have an out-of-plane lattice parameter around 0.3865nm, almost independent of the substrate (i.e. the nature of the strains). The transport properties reveal that, while LSFO films deposited on STO exhibit an anomaly in the resistivity vs temperature at 180K (corresponding to the charge-ordered transition and associated with a transition from a paramagnetic to an antiferromagnetic state), the films grown on LAO display a very small magnetoresistance behavior and present an hysteresis around 270K under the application of a 4T magnetic field. The changes in transport properties between both substrates are discussed and compared…

Relations between structural distortions and transport properties in Nd$_{0.5}$Ca$_{0.5}$MnO$_3$ strained thin films

E. Rauwel Buzin, W. Prellier, B. Mercey +2 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

Strained thin films of charge/orbital ordered (CO/OO) $Nd_{0.5}Ca_{0.5}MnO_3$ (NCMO) with various thickness have grown on (100)-SrTiO$_3$ and (100)-LaAlO$_3$ substrates, by using the Pulsed Laser Deposition (PLD) technique. The thickness of the films influences drastically the transport properties. As the thickness decreases, the CO transition increases while at the same time the insulator-to-metal transition temperature decreases under application of a 7T magnetic field. Clear relationships between the structural distortions and the transport properties are established. They are explained on the basis of the elongation and the compression of the Mn-O-Mn and Mn-O bond angles and distances of the \QTR{it}{Pnma} structure, which modify the bandwidth and the Jahn-Teller distortion in these materials

Colossal magnetoresistive manganite thin films

W. Prellier, Ph. Lecoeur, B. Mercey

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

Mixed-valence perovskite manganites (Re$_{1-x}$A$_{x}$MnO$_{3}$ where Re=rare earth, A=alkaline earth) provide a unique opportunity to study the relationships between the structure and the magnetotransport properties due to an interplay among charge carriers, magnetic coupling, orbital ordering and structural distortion. This makes these compounds very exciting from both the basic research and from the technological view point. As the technology pursued with these materials requires film growth, extensive studies have been made on materials synthesis, structural and physical characterization and device fabrication. In this article, the results of the different experimental techniques and the effects of the deposition procedure of the manganite thin films are first reviewed. Second, the relation between the structural and the physical properties mentioned, and the influence of strains…

Control of the colossal magnetoresistance by strain effect in Nd$_{0.5}$Ca$_{0.5}$MnO$_{3}$ thin films

E. Rauwel-Buzin, W. Prellier, Ch. Simon +5 more

cond-mat.mtrl-sci · · arXiv ↗ · more like this ·

Thin films of Nd$_{0.5}$Ca$_{0.5}$MnO$_{3}$ manganites with colossal magnetoresistance (CMR) properties have been synthesized by the Pulsed Laser Deposition technique on (100)-SrTiO$_{3}$. The lattice parameters of these manganites and correlatively their CMR properties can be controlled by the substrate temperature $T_{S}$. The maximum CMR effect at 75K, calculated as the ratio $ρ(H=0T)/ρ(H=7T)$ is 10$^4$ for a deposition temperature of $T_{S}=680$ degC. Structural studies show that the Nd$_{0.5}$Ca$_{0.5}$MnO$_{3}$ film is single phase, [010]-oriented and has a pseudocubic symmetry of the perovskite subcell with a=3.77$Å$ at room temperature. We suggest that correlation between lattice parameters, CMR and substrate temperature $T_{S}$ result mainly from substrate-induced strains which can weaken the charge-ordered state at low temperature.