Computer Science · Artificial Intelligence
Microfabrication\nand in Vivo Performance of a Microdialysis\nProbe with Embedded Membrane
WoongHee Lee (1430149), Thitaphat Ngernsutivorakul (1430152), Omar S. Mabrouk (1430161), Jenny-MarieT. Wong (1430143), Colleen E. Dugan (1430158), Samuel S. Pappas (1430155), Hyeun Joong Yoon (1430146), Robert T. Kennedy (368322)
See on the mapAbstract
Microdialysis\nsampling is an essential tool for in vivo neurochemical\nmonitoring. Conventional dialysis probes are over 220 μm in\ndiameter and have limited flexibility in design because they are made\nby assembly using preformed membranes. The probe size constrains spatial\nresolution and governs the amount of tissue damaged caused by probe\ninsertion. To overcome these limitations, we have developed a method\nto microfabricate probes in Si that are 45 μm thick × 180\nμm wide. The probes contain a buried, U-shaped channel that\nis 30 μm deep × 60 μm wide and terminates in ports\nfor external connection. A 4 mm length of the probe is covered with\na 5 μm thick nanoporous membrane. The membrane was microfabricated\nby deep reactive ion etching through a porous aluminum oxide layer.\nThe microfabricated probe has cross-sectional area that is 79% less\nthan that of the smallest conventional microdialysis probes. The probes\nyield 2–20% relative recovery at 100 nL/min perfusion rate\nfor a variety of small molecules. The probe was successfully tested\nin vivo by sampling from the striatum of live rats. Fractions were\ncollected at 20 min intervals (2 μL) before and after an intraperitoneal\ninjection of 5 mg/kg amphetamine. Analysis of fractions by liquid\nchromatography–mass spectrometry revealed reliable detection\nof 14 neurochemicals, including dopamine and acetylcholine, at basal\nconditions. Amphetamine evoked a 43-fold rise in dopamine, a result\nnearly identical to a conventional dialysis probe in the same animal.\nThe microfabricated probes have potential for sampling with higher\nspatial resolution and less tissue disruption than conventional probes.\nIt may also be possible to add functionality to the probes by integrating\nother components, such as electrodes, optics, and additional channels.