Social Sciences · Political Science and International Relations
Robustly Curing Epoxy\nNovolacs by Linear and Cyclic\nSiloxane-Functionalized Eugenol: Impact of Topologies of Cross-Linkers\non Properties of Thermosets
Rongsheng Li (11805136), Shujie Zhang (383712), Bolin Zhou (14411331), Xiaoxuan Duan (17721791), Boyang Li (4268965), Jintao Wan (1854898)
See on the mapAbstract
Eugenol-based epoxy resins have been extensively studied,\nbut eugenol-derived\ncuring agents have been less addressed. A curing agent is decisive\nto fundamental curing mechanisms and greatly affects intrinsic properties\nof finalized epoxy thermosets. Herein, we synthesize linear (2SiEU)\nand cyclic (4SiEU) siloxane-functionalized eugenol hardeners to cross-link\nmultifunctional epoxy novolacs of bisphenol A (BNE200) and <i>o</i>-cresol (CNE202). How the linear and cyclic siloxane topologies\nof 2SiEU and 4SiEU affect the thermal, mechanical, fracture mechanical,\nand thermomechanical properties, water absorption, and wettability\nof resultant thermosets is highlighted. 4SiEU endows 4SiEU/BNE200\nand 4SiEU/CNE202 thermosets with an elevated glass transition temperature\nfrom 52.9 and 53.9 °C to 97.3 and 89.4 °C (DSC), an increased\nresidue (750 °C/N<sub>2</sub>) from 18.9 and 20.3% to 32.6 and\n43.5%, an enhanced tensile strength from 48.1 and 46.8 MPa to 61.8\nand 63.9 MPa, and an impact strength from 1.56 and 1.57 kJ·m<sup>–2</sup> to 2.70 and 2.22 kJ·m<sup>–2</sup>, whereas\nthe critical stress intensity factor (<i>K</i><sub>IC</sub>) decreases from 1.56 and 1.67 MPa·m<sup>1/2</sup> to 1.26 and\n 1.29 MPa·m<sup>1/2</sup>, respectively, compared to 2SiEU/BNE200\nand 2SiEU/CNE202. All of the thermosets display the high tensile elongation\nat break, flexural strength, and flexural modulus above 7.3%, 72 MPa,\nand 2.1 GPa, respectively, with low water absorption (<∼1.8%).\nIn general, the 4SiEU-incorporated cyclic siloxane moieties endow\nthe superior overall performances to the obtained thermosets compared\nto 2SiEU because they function as additional cross-linkers and increase\nthe content of thermally stable Si–O bonds, and they cause\nan additional secondary relaxation at a subroom temperature range.\nNevertheless, 2SiEU delivers better fracture mechanical properties,\nwhich are likely more sensitive to the increased plastic deformation\nof the resin matrix. Altogether, 2SiEU and 4SiEU are capable of effectively\ncross-linking the standard epoxy novolacs exhibiting multiple properties\nof interest, expressing a good promise as robust hardeners for biobased\nepoxy thermosets.